2006-12-23  Kevin P. Fleming  <kpfleming@digium.com>

	* Zaptel 1.4.0 released.
	
2006-12-18 14:01 +0000 [r1726-1729]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xdefs.h, xpp: r1724@boole: tzafrir | 2006-12-18 15:55:59
	  +0200 Code is 2.6-specific anyway, no need for an explicit test.

	* xpp, xpp/xpp_usb.c: r1723@boole: tzafrir | 2006-12-18 15:54:04
	  +0200 Use the internal version (without locking) of
	  usb_reset_device. Intended for kernel 2.6.9 and earlier. Finally
	  full support of 2.6.8 and 2.6.9. r2937: diego | 2006-12-17
	  14:20:36 +0200 r2940: tzafrir | 2006-12-17 16:32:51 +0200

	* xpp/xpp_zap.c, xpp: r1722@boole: tzafrir | 2006-12-18 15:50:36
	  +0200 xpp_zap.c: Better error hanlding during module init. orig
	  r2948: oron | 2006-12-17 18:54:00 +0200

	* xpp, xpp/xpd.h: r1721@boole: tzafrir | 2006-12-18 15:46:42 +0200
	  Assume every 2.6.9 kernel is a later RHEL4 kernel, which
	  backported the gfp_t typedef. Either way we break some systems).
	  r2938: diego | 2006-12-17 14:22:16 +0200

2006-12-15 13:50 +0000 [r1716-1719]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_zap.c, xpp/card_fxo.c, xpp/README.Astribank,
	  xpp/utils/xpp_fxloader, xpp/utils/genzaptelconf, xpp: Sync to xpp
	  RELEASE-1.2.0 2933. r2847@boole: diego | 2006-12-03 10:33:00
	  +0200 added documentation which explains which packages are
	  needed to build the drivers on different distributions.
	  r2862@boole: tzafrir | 2006-12-05 08:43:50 +0200
	  README.Astribank: A typo in the sample config (changeset:2861).
	  r2891@boole: tzafrir | 2006-12-08 01:11:45 +0200 Re-accept
	  changeset:2832 after all. r2892@boole: tzafrir | 2006-12-08
	  02:46:07 +0200 Merge genzaptelconf changeset:2866 from trunk: *
	  Zapata comment on unidentified channel goes to $zapata_file *
	  Correct pattern for Sangoma A200 card's channels. r2893@boole:
	  tzafrir | 2006-12-08 03:11:37 +0200 genzaptelconf: * Add options
	  xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel. *
	  Do print the original line for every channel. r2909@boole:
	  tzafrir | 2006-12-10 20:03:59 +0200 Add some sleeps in older
	  kernels in the firmware loading script. r2932@boole: tzafrir |
	  2006-12-14 17:30:12 +0200 Make the warning about a call to
	  off-hook FXO debug. At least if we cannot suppress it at module
	  load time. r2933@boole: tzafrir | 2006-12-14 17:32:00 +0200 Don't
	  redefine 'bool' on newer kerenls to fix building with kernel
	  2.6.19. Taken from Digium tree. (from changeset:2930)

	* xpp/firmwares/FPGA_1151.hex, xpp/firmwares/FPGA_FXS.hex, xpp:
	  r1715@boole: tzafrir | 2006-12-15 14:35:26 +0200 Firmwares to fix
	  caller ID detection timing issue.

2006-12-12  Kevin P. Fleming  <kpfleming@digium.com>

	* Zaptel 1.4.0-beta3 released.
	
2006-12-11 19:07 +0000 [r1698-1701]  Kevin P. Fleming <kpfleming@digium.com>

	* /, xpp/xdefs.h: Merged revisions 1700 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1700
	  | kpfleming | 2006-12-11 13:05:43 -0600 (Mon, 11 Dec 2006) | 2
	  lines kernel 2.6.19 now has a type called 'bool', although it's
	  not completely implemented so there will still be some warnings
	  when building xpp against 2.6.19 kernel headers ........

	* pciradio.c, wct4xxp/base.c, wcte11xp.c, wct1xxp.c, wctdm.c, /,
	  torisa.c, wcusb.c, wctdm24xxp.c, zaptel.h, tor2.c, wcfxo.c:
	  Merged revisions 1697 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1697
	  | kpfleming | 2006-12-11 12:27:15 -0600 (Mon, 11 Dec 2006) | 2
	  lines kernel 2.6.19 API changes compatibility ........

2006-12-06 23:25 +0000 [r1687]  Joshua Colp <jcolp@digium.com>

	* Makefile, ztcfg-dude.c, /: Merged revisions 1686 via svnmerge
	  from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
	  r1686 | file | 2006-12-06 18:22:11 -0500 (Wed, 06 Dec 2006) | 2
	  lines Link ztcfg-dude against stdc++ so we get needed functions.
	  (issue #8494 reported by Romik) ........

2006-12-01 00:13 +0000 [r1673-1678]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/card_fxo.c, xpp: r1671@boole: tzafrir | 2006-12-01 01:30:24
	  +0200 r2806@boole: oron | 2006-11-27 16:54:06 +0200 Fixed panic
	  in ticket:147 merged code from changeset:2802 changeset:2804

	* xpp/card_fxo.c, xpp: r1670@boole: tzafrir | 2006-12-01 01:29:57
	  +0200 r2794@boole: oron | 2006-11-26 14:24:15 +0200 Remove all
	  SOFT_RING code (unused for a long time).

	* xpp/xpp_zap.c, xpp, xpp/xpd.h: r1668@boole: tzafrir | 2006-11-30
	  23:48:25 +0200 r2832@boole: tzafrir | 2006-11-29 11:06:06 +0200
	  Add parameter xpp_ec to the module xpp (xpp_zap.c). Defaults to
	  1. If 0, module will use Zaptel echo canceller even with
	  XPP_EC_CHUNK. Parameter is read-only for now: cannot be set
	  through /sys/modules. (Merge of changeset:2830)

	* xpp/utils/genzaptelconf, xpp: r1667@boole: tzafrir | 2006-11-30
	  23:46:46 +0200 r2831@boole: tzafrir | 2006-11-29 11:05:08 +0200
	  genzaptelconf: A list of countries for which to use busydetect.
	  (backport of changeset:2829)

	* xpp/init_card_3_23, xpp/init_card_4_23, xpp/calibrate_slics,
	  xpp/card_fxo.c, xpp/xbus-core.c, xpp/card_global.c,
	  xpp/card_fxs.c, xpp/README.Astribank, xpp/utils/Makefile,
	  xpp/Makefile, xpp/utils/genzaptelconf, xpp: r1666@boole: tzafrir
	  | 2006-11-30 23:46:11 +0200 r2817@boole: oron | 2006-11-28
	  13:39:47 +0200 Maintenance branch for asterisk-1.2.x

2006-11-30 00:24 +0000 [r1664]  Jason Parker <jparker@digium.com>

	* build_tools/genmodconf, /: Merged revisions 1663 via svnmerge
	  from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
	  r1663 | qwell | 2006-11-29 18:23:33 -0600 (Wed, 29 Nov 2006) | 2
	  lines Fix issue that was discovered by using dash as /bin/sh
	  instead of bash. ........

2006-11-29 22:27 +0000 [r1661]  Kevin P. Fleming <kpfleming@digium.com>

	* /, zconfig.h: Merged revisions 1660 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1660
	  | kpfleming | 2006-11-29 16:24:07 -0600 (Wed, 29 Nov 2006) | 2
	  lines clarify the BOOST_RINGER compile-time option ........

2006-11-29 17:31 +0000 [r1656-1658]  Matt Frederickson <creslin@digium.com>

	* ztcfg.c: Fix for #7860. Make sure we don't allow channel 16 to be
	  clear if it's in E1/CAS mode.

	* zttool.c: Fix for (#8300)

2006-11-26 08:12 +0000 [r1642]  Russell Bryant <russell@digium.com>

	* wcte11xp.c, /: Merged revisions 1641 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1641
	  | russell | 2006-11-26 03:10:22 -0500 (Sun, 26 Nov 2006) | 3
	  lines Remove a misplaced semicolon which caused some debug output
	  to be printed regardless of the debug setting. (issue #8414,
	  gknispel_proformatique) ........

2006-11-22 23:30 +0000 [r1637]  Matt Frederickson <creslin@digium.com>

	* zaptel.c: Update for #8403

2006-11-21 15:19 +0000 [r1623]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/utils/Makefile: Typo: SBINDIR -> BINDIR .

2006-11-17 17:47 +0000 [r1614-1615]  Jason Parker <jparker@digium.com>

	* Makefile: Fix an issue (8071) where wct4xxp wasn't being put into
	  /etc/modprobe.d/zaptel (or similar). There should be no reason
	  that adding wct4xxp to the MODULES variable at this point in the
	  Makefile, would cause any harm. Somebody please correct me if I'm
	  wrong... (Fix is slightly different from 1.2)

	* /: Blocked revisions 1613 via svnmerge ........ r1613 | qwell |
	  2006-11-17 11:43:12 -0600 (Fri, 17 Nov 2006) | 5 lines Fix an
	  issue (8071) where wct4xxp wasn't being put into
	  /etc/modprobe.d/zaptel (or similar). There should be no reason
	  that adding wct4xxp to the MODULES variable at this point in the
	  Makefile, would cause any harm. Somebody please correct me if I'm
	  wrong... ........

2006-11-17 04:12 +0000 [r1611]  BJ Weschke <bweschke@btwtech.com>

	* /, zaptel.c: Merged revisions 1610 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1610
	  | bweschke | 2006-11-16 23:06:05 -0500 (Thu, 16 Nov 2006) | 4
	  lines mattf - I'm not sure if this is where you wanted the
	  definitions placed. If not, please fix, but this gets the
	  compiles working again for now. ........

2006-11-17 00:52 +0000 [r1606-1609]  Matt Frederickson <creslin@digium.com>

	* zaptel.c: Fix for 7991.

	* zaptel.c: Fix for 7769

2006-11-11 14:34 +0000 [r1590]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/init_card_3_23, xpp/init_card_4_23: init_card[34]_23: merge
	  from 2654,2655. * Redirect stderr to /dev/null. Without any
	  redirection, it may fail with exitval=4 . Probably, fd 2 is
	  closed and the shell (or sed which is used in the scripts) tries
	  to write to it (or do some other I/O related syscall) which
	  fails. * make XPP_BASE handling identical in the two scripts.

2006-11-09 15:58 +0000 [r1576]  Russell Bryant <russell@digium.com>

	* Makefile: fix an expression in the install target (issue #8321,
	  tzafrir)

2006-11-08 23:06 +0000 [r1574]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/vpm450m.c, wct4xxp/base.c, wcte11xp.c, wct4xxp/vpm450m.h,
	  /: Merged revisions 1573 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1573
	  | kpfleming | 2006-11-08 17:04:33 -0600 (Wed, 08 Nov 2006) | 3
	  lines clean up recent VPMOCT changes add support for Infineon
	  FALC rev 2.2 ........

2006-11-08 16:01 +0000 [r1571]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/utils/print_modes.c: Fixed a typo in the "wctdm
	  reimplementation".

2006-11-08 03:44 +0000 [r1566-1568]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp, configure, configure.ac, makeopts.in: update configure
	  script to add searching for libusb update svn:ignore for new
	  firmware header file names

2006-11-06 22:48 +0000 [r1565]  Matt Frederickson <creslin@digium.com>

	* wct4xxp/vpm450m.c, wct4xxp/Kbuild, wct4xxp/base.c,
	  wct4xxp/Makefile, wct4xxp/vpm450m.h, wct4xxp/OCT6114-64D.ima
	  (added): Add support into 1.4 branch for new VPMOCT64 as well

2006-11-06 19:07 +0000 [r1557-1558]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/init_card_3_23, xpp/init_card_4_23: Fixes for card init
	  scripts from rev 2633: * Don't log card init scripts to
	  /tmp/results . * Document how to trace, though. * init_card_4_23:
	  don't re-open the slics file.

	* xpp/xpp_zap.c, xpp/utils/print_modes.c,
	  xpp/utils/xpp_fxloader.usermap, xpp/firmwares/FPGA_1151.hex
	  (added), xpp/xpp_zap.h, xpp/slic.c (removed), xpp/xproto.c,
	  xpp/firmwares/FPGA_FXS.hex (added), xpp/firmwares/USB_1130.hex
	  (added), xpp/utils/USB_1130.hex (removed), xpp/utils/FPGA_FXS.hex
	  (removed), xpp/slic.h (removed), xpp/init_data_3_20.cmd
	  (removed), xpp/xpd.h, xpp/xproto.h, xpp/firmwares/USB_1150.hex
	  (added), xpp/init_card_4_23 (added), xpp/calibrate_slics,
	  xpp/xbus-core.c, xpp/init_data_4_19.cmd (removed),
	  xpp/utils/adj_clock.c (added), xpp/utils/xpp_fxloader,
	  xpp/xbus-core.h, xpp/xdefs.h, xpp, xpp/utils,
	  xpp/utils/genzaptelconf.8, xpp/card_fxo.c, xpp/card_global.c,
	  xpp/card_fxs.c, xpp/README.Astribank, xpp/card_fxo.h,
	  xpp/utils/Makefile, xpp/Makefile, xpp/utils/adj_clock.8 (added),
	  xpp/card_fxs.h, xpp/card_global.h, xpp/init_data_4_20.cmd
	  (removed), xpp/init_card_3_23 (added), xpp/initialize_registers
	  (removed), xpp/init_data_3_19.cmd (removed),
	  xpp/firmwares/LICENSE.firmware (added), xpp/firmwares/README
	  (added), xpp/utils/USB_8613.hex (removed), xpp/LICENSE.firmware
	  (removed), xpp/utils/genzaptelconf, xpp/firmwares (added),
	  xpp/xpp_usb.c: Merging xpp driver release 1.2 (rev. 2569),
	  originally team/tzafrir/xpp_1.2 * Should build well. Almost
	  final. * genzaptelconf: Also work when zap_autoreg=0 *
	  README.Astribank updated for rev. 1.2. * xpp/utils/Makefile: Use
	  $< with cc -c * Get xpp/utils configuration from autoconf
	  (without changesin top dir)

2006-11-01 19:04 +0000 [r1547]  Russell Bryant <russell@digium.com>

	* Makefile, wct4xxp/Makefile, configure, configure.ac,
	  xpp/utils/Makefile, makeopts.in: instead of setting HOSTCC and CC
	  directly in the Makefile, use the information provided by the
	  configure script (issue #8055, tzafrir)

2006-10-31 06:26 +0000 [r1543]  Russell Bryant <russell@digium.com>

	* Makefile, /: Merged revisions 1542 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1542
	  | russell | 2006-10-31 01:25:16 -0500 (Tue, 31 Oct 2006) | 3
	  lines fix the installation of wct4xxp for 2.4 kernels (issue
	  #7964, fixed by gkloepfer, but the committed fix is slightly
	  modified) ........

2006-10-26 00:03 +0000 [r1536]  Kevin P. Fleming <kpfleming@digium.com>

	* wctdm.c, /, wctdm24xxp.c: Merged revisions 1534-1535 via svnmerge
	  from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
	  r1534 | kpfleming | 2006-10-25 18:54:41 -0500 (Wed, 25 Oct 2006)
	  | 2 lines do ProSLIC 3215 check properly ........ r1535 |
	  kpfleming | 2006-10-25 19:00:31 -0500 (Wed, 25 Oct 2006) | 2
	  lines do ProSLIC 3215 check properly in this driver too ........

2006-10-24 01:33 +0000 [r1528-1530]  Russell Bryant <russell@digium.com>

	* pciradio_vhdl.tar.gz (removed), raddiag.tar.gz (removed): Both of
	  these files are corrupted and can not be decompressed, so they
	  need to be re-added. (issue #8134)

	* /, doc/ztmonitor.8, doc/zttool.8, doc/ztcfg.8: Merged revisions
	  1527 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1527
	  | russell | 2006-10-23 21:08:27 -0400 (Mon, 23 Oct 2006) | 3
	  lines convert some characters of ISO8859-1 encoding to be UTF-8
	  (issue #8200, jcollie) ........

2006-10-20 01:26 +0000 [r1520]  Joshua Colp <jcolp@digium.com>

	* /, torisa.c, zaptel.h, zconfig.h: Merged revisions 1519 via
	  svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
	  ........ r1519 | file | 2006-10-19 21:23:26 -0400 (Thu, 19 Oct
	  2006) | 2 lines Later distros have now taken to removing this
	  file as it has been deprecated for awhile now... so on kernels
	  2.6.18 or higher we can safely not include it. (props to jsmith)
	  ........

2006-10-18 02:15 +0000 [r1518]  Russell Bryant <russell@digium.com>

	* /: Blocked revisions 1517 via svnmerge ........ r1517 | russell |
	  2006-10-17 22:14:43 -0400 (Tue, 17 Oct 2006) | 3 lines remove
	  ROOT_PREFIX, and move INSTALL_PREFIX to before the first time it
	  is used (issue #7913, darren1713) ........

2006-10-17  Kevin P. Fleming  <kpfleming@digium.com>

	* Zaptel 1.4.0-beta2 released.
	
2006-10-17 16:40 +0000 [r1507]  Russell Bryant <russell@digium.com>

	* wct4xxp/base.c: Set the readbuf size to be the same size of the
	  variable, readsize. This buffer was 31 bytes, while the readsize
	  could be 32 bytes, causing a read into invalid memory. (issue
	  #8155, araasch)

2006-10-11 17:25 +0000 [r1500]  Joshua Colp <jcolp@digium.com>

	* Makefile: Copy to both directories, not just the first one.

2006-10-02 23:50 +0000 [r1490]  Matt O'Gorman <mogorman@digium.com>

	* wctdm.c, wctdm24xxp.c: add support for setting gain registers on
	  the fxo and fxs modules.

2006-09-20  Kevin P. Fleming  <kpfleming@digium.com>

	* Zaptel 1.4.0-beta1 released.
