# Config file for /etc/init.d/ser2net # Set the configuration file to one other than the default of /etc/ser2net/ser2net.yaml # #CONFIG_FILE="/etc/ser2net/ser2net.yaml" # Enables the control port and sets the TCP port to listen to for the control port. # A port number may be of the form [host,]port, such as 127.0.0.1,2000 or localhost,2000. # If this is specified, it will only bind to the IP address specified for the port. # Otherwise, it will bind to all the addresses on the machine. # #CONTROL_PORT="" # Enable or disable UUCP locking (default=yes) # #UUCP_LOCKS="no" # see the ser2net(8) manual page for additional options you can configure here # #EXTRA_OPTS=""