commit 65fd628cdfd1c95bd01a50706d4577655d1dd404 Author: Aaron Plattner Date: Tue Feb 23 10:22:26 2016 -0800 xrandr 1.5.0 Signed-off-by: Aaron Plattner commit d62030b506f6b686ffe1e750ea9d3a855beec1f0 Author: Chris Wilson Date: Sun Sep 13 11:40:37 2015 +0100 Only use the current information when setting modes Before we change the state (e.g. adding a mode or applying one to an output), we query the screen resources for the right identifiers. This should only use the current information rather than force a reprobe on all hardware - not only can that reprobe be very slow (e.g. EDID timeouts on the order of seconds), but it may perturb the setup that the user is trying to configure. Signed-off-by: Chris Wilson commit 3d03be780fca4949b11ead46c5ea5d3266c03c32 Author: Chris Wilson Date: Thu Jun 18 08:27:49 2015 +0100 Mark all CRTC as currently unused for second picking CRTC pass We perform two passes over the CRTC in order to find the preferred CRTC for each enabled output. In the first pass, we try to preserve the existing output <-> CRTC relationships (to avoid unnecessary flicker). If that pass fails, we try again but with all outputs first disabled. However, the logic to preserve an active CRTC was not disabled along with the outputs - meaning that if one was active but its associated output was disabled by the user, then that CRTC would remain unavailable for other outputs. The result would be that we would try to assign more CRTC than available (i.e. if the user request 3 new HDMI outputs on a system with only 3 CRTC, and wished to switch off an active internal panel, we would report "cannot find CRTC" even though that configuration could be established.) Reported-and-tested-by: Nathan Schulte Signed-off-by: Chris Wilson commit 53ef3fc13b3e282902892e3140765460c6f93276 Author: Chris Wilson Date: Thu Jun 18 08:27:48 2015 +0100 Mark disabling an output as a change in its CRTC When an output is disabled via the cmdline, we can use that information to prevent assigning the current CRTC to the output and free it up for reuse by other outputs in the first pass of picking CRTC. Reported-and-tested-by: Nathan Schulte Signed-off-by: Chris Wilson commit 09989b09a342b273ee30e1d96267dced3cbe61b0 Author: Aaron Plattner Date: Thu Apr 9 11:14:54 2015 -0700 Split verbose mode printing into a helper function Combine the two forms of verbose mode printing into a single function. Pass the 'current' and 'preferred' flags as arguments. This fixes the code that prints unassociated modes to print the flags as well. Signed-off-by: Aaron Plattner Reviewed-by: Kenneth Graunke commit d06730e94320175d40ff6f2bb38dce55312f2e54 Author: Keith Packard Date: Tue Dec 16 01:57:45 2014 -0800 Add monitor support (v2) This adds the ability to query, set and delete monitors v2: [airlied] add list active monitors Reviewed-by: Dave Airlie Signed-off-by: Keith Packard commit 3076c3494b6f3f00b9c4509c2dab6f40858af4cf Author: Dave Airlie Date: Tue Mar 31 11:49:00 2015 +1000 xrandr: don't return NULL from a void Reported-by: Jeremy Huddleston Sequoia Signed-off-by: Dave Airlie commit 6957ad0cf3cdd10e8f4a5638b36f25c7a9b4ea25 Author: Dave Airlie Date: Mon Mar 30 14:51:49 2015 +1000 xrandr: parse property returns correctly. Xlib uses longs for 32-bit, so when we get values back they are in longs, this fixes the xrandr parsing code to parse the correct sized values according to Xlib. Reviewed-by: Keith Packard Signed-off-by: Dave Airlie commit f429a517684e8f99c15bc2858e62bbd112331456 Author: Keith Packard Date: Wed Oct 8 13:16:07 2014 +0200 keystone: Report matrix error. Deal with "primary" in xrandr output Compute the error cause by the fixed point matrix representation and display that. Accept the 'primary' word found in xrandr output and ignore it. Signed-off-by: Keith Packard commit 527d83dde0cb78cbfbb67d203d073e41e110d4a1 Author: Keith Packard Date: Mon Jul 9 10:52:52 2012 -0700 Increase keystone.5c default window size commit 9887ed4989e0abd48004598be0eb5cb06fa40bd1 Author: Aaron Plattner Date: Fri Aug 1 23:14:42 2014 -0700 xrandr 1.4.3 Signed-off-by: Aaron Plattner commit 20d76f773cf8de474cf7a3f1082961605732c3f1 Merge: 00477d88297e 193a358563a5 Author: Aaron Plattner Date: Fri Aug 1 23:10:46 2014 -0700 Merge commit '193a358' Conflicts: xrandr.c commit 193a358563a59c1a3fc55f55029c605e2419c80b Author: Stéphane Aulery Date: Sat Jun 29 16:50:25 2013 -0700 Mention of --brightness with -h option Reported by jidanni at http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=709569 Signed-off-by: Stéphane Aulery Reviewed-By: Matt Dew Signed-off-by: Aaron Plattner commit 00477d88297eaa6c87aa144548590c32540e3928 Author: Connor Behan Date: Tue Jun 10 23:56:12 2014 -0700 Allow -x and -y switches to undo themselves People who want to dick around might think it is safe to run "xrandr -x" before they know any of the other syntax. When "xrandr -x" again does not get back to a normal screen, they are stuck having to read a manpage with reflected text. Signed-off-by: Connor Behan Reviewed-by: Aaron Plattner Tested-by: Aaron Plattner Signed-off-by: Aaron Plattner commit 7d464312fb84c080a6e287edd21a794193a0dd78 Author: Connor Behan Date: Sun Jun 1 16:35:50 2014 -0700 Remove duplicate printing of the axis Even in verbose mode, why print the same information twice? Signed-off-by: Connor Behan Reviewed-by: Aaron Plattner Signed-off-by: Aaron Plattner commit 792f05ea20d5191425154470760e36dcf023c6e9 Author: Dominik Behr Date: Tue Apr 1 18:38:05 2014 -0700 xrandr: use full range for gamma table generation Calculate gamma table using full [0,65536) range and do not make any assumptions about relation of gamma table size and significant bits. Gamma table size has nothing to do with number of significant bits in hardware. In particular we are dealing now with gamma table that has 17 entries and 8 bit precision, there are other GPUs with 10 bit precision and less than 256 entries using partial linear approximation. Deriving assumed gamma table significant bits from size of gamma table leads to incorrect calculations and loss of precision. Also XRandR specification never mentions that gamma tables need to be power of 2. Signed-off-by: Dominik Behr Reviewed-by: Stéphane Marchesin commit 866366d0825c3f488abd58960e4f76ae50de08d1 Author: Thomas Klausner Date: Sat Mar 29 00:50:17 2014 +0100 Remove unnecessary parentheses. Reviewed-by: Hans de Goede Signed-off-by: Thomas Klausner commit 31f5fa6a47db154abb47cf16e9f6cc4d983ad371 Author: Aaron Plattner Date: Thu Mar 27 11:37:07 2014 -0700 xrandr 1.4.2 Signed-off-by: Aaron Plattner commit 934a424a05a296c0b8af015476e11b191d55eba3 Author: Aaron Plattner Date: Fri Mar 21 10:35:56 2014 -0700 xrandr: document how to disconnect RandR 1.4 providers Commit a6217be2d5a93a4c7b48f4081a4a8e14c3c97014 restored the ability to disconnect RandR 1.4 providers from each other, but it's not clear from the documentation how to actually do that. Try to clarify by mentioning it in the man page. Signed-off-by: Aaron Plattner Reviewed-by: Dave Airlie commit a6217be2d5a93a4c7b48f4081a4a8e14c3c97014 Author: Dave Airlie Date: Fri May 3 10:05:04 2013 +1000 xrandr: allow disconnecting of offload and outputs Before the lookup code passing a 0 XID would disconnect, this fixes it backup. Signed-off-by: Dave Airlie Reviewed-by: Aaron Plattner Tested-by: Aaron Plattner Signed-off-by: Aaron Plattner commit 00c795e99fe29ecd56e05e915e508c7af0ac39ad Author: Ville Syrjälä Date: Fri May 31 17:01:54 2013 +0300 xrandr: Use floating point for VTotal when calculating refresh rate Interlaced modes generally have an odd VTotal, so we lose half a line from VTotal when we divide by two. That causes the final refresh rate to be slightly off. Make VTotal a double to avoid the problem. Signed-off-by: Ville Syrjälä Reviewed-by: Aaron Plattner commit 8f9b993342fddfceaa1afbec2996ce10038f10d7 Author: Ville Syrjälä Date: Fri May 31 17:01:53 2013 +0300 xrandr: Use more decimal places when printing various rates Using just one decimal place for dotclock and refresh rates loses quite a bit of information. When dealing with 60Hz vs. 59.94Hz refresh rate modes for example, it's useful to see at least two decimal places. For the dotclock in similar cases, three decimal places seems quite a bit better than just one. Signed-off-by: Ville Syrjälä Reviewed-by: Aaron Plattner commit 7ede207f9064fd88427026e38818819c2c8422bb Author: Aaron Plattner Date: Fri Jan 3 05:48:17 2014 -0800 Special-case printing of the GUID property Rather than printing GUIDs as 16 signed decimal integers, print them in {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} format. Signed-off-by: Aaron Plattner Reviewed-by: Alex Deucher commit e7a19c8b5a26c8bfd76a7399a1a15eac01184261 Author: Aaron Plattner Date: Fri Jan 3 05:22:02 2014 -0800 Move EDID printing into a helper function Localize the specialness of EDID printing by moving it into a single function, print_edid, which prints the binary EDID data. Remove the is_edid parameter from everything else. Signed-off-by: Aaron Plattner Reviewed-by: Alex Deucher commit a29728ca9599fd08da1243e9b422ac26a24cc05b Author: Aaron Plattner Date: Fri Jan 3 05:14:35 2014 -0800 Split output property printing into a helper function Move the body of the code that prints the actual output property values into a helper function. This will make it easier for this function to select special-case property printers for properties that need special formatting. Signed-off-by: Aaron Plattner Reviewed-by: Alex Deucher commit c5334bb4137d6ea7b8c8b10d51131b9450d1106b Author: Alan Coopersmith Date: Tue Jul 16 23:30:27 2013 -0700 xrandr 1.4.1 commit 0e0b47341a45c138082d9f8047dcbdb91b90155d Author: Alan Coopersmith Date: Sat Jul 13 00:11:41 2013 -0700 Combine usage message strings Signed-off-by: Alan Coopersmith commit 38772ec3b5a7216a88676f95b5edc764dd0a23d6 Author: Alan Coopersmith Date: Sat Jul 13 00:07:26 2013 -0700 Declare capability_name() as returning const char * Only used as an argument to printf. Clears gcc warnings: xrandr.c: In function ‘capability_name’: xrandr.c:237:2: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:239:2: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:241:2: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:243:2: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:245:5: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] Signed-off-by: Alan Coopersmith commit f53d8511d26a26e9bd6b1bc665f6283f1efd98d9 Author: Thomas Date: Fri Nov 9 14:33:08 2012 +0000 Bug 56923 - Make command line options consistent (single vs double dash) Most of xrandr's command line options follow the system of single dashes for single character options (e.g. "-v") and double dashes for long options ("--version"). The only exceptions are "-display" and "-help", most likely for historical reasons. To make the behavior consistent across all options, the following patch adds "--display" and "--help" as alternatives to the current inconsistency. The man page got updated as well, recommending double-dash variants for both options. The old behavior is still supported, so the patch should not break any existing usage/script. Signed-off-by: Alan Coopersmith commit bd1502f50f0c230798bdce99dec6efc76791c024 Author: Thomas Klausner Date: Sun Jun 2 21:30:39 2013 +0200 Protect config.h like usual. Reviewed-by: Alan Coopersmith Signed-off-by: Alan Coopersmith commit ace5e2b21b2a204f94c6452fa0d8f36699aec249 Author: Andy Ritger Date: Thu May 2 01:20:27 2013 -0700 xrandr: calloc XRRModeInfo's passed to libXrandr. The "--newmode" commandline option initializes an XRRModeInfo and passes it into XRRCreateMode(). calloc(3) it to avoid uninitialized fields. For consistency, calloc(3) all the places where umode_t's (the wrapper structure for XRRModeInfo) are allocated. Signed-off-by: Andy Ritger Tested-by: Nikhil Mahale Signed-off-by: Aaron Plattner commit eb17ad8adc9400f6ed252872f13ccf5551f9e2e9 Author: Aaron Plattner Date: Thu Feb 28 12:01:53 2013 -0800 Print spaces between XA_ATOM property values Commit b26fd532b3dab222956ea27eef4e41345978b5b2 redid how xrandr prints properties. It neglected to put spaces between the values of XA_ATOM properties, so they all run together. For example, audio: auto supported: force-dvioffautoon Fix this by putting a space after each atom name. In addition, some drivers create property values with spaces in them, so put commas between entries to disambiguate. For example, Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 Do the same for properties with multiple valid ranges. Signed-off-by: Aaron Plattner Reviewed-by: Peter Hutterer commit 222f245fb3a00308cb3ff491f5c84ac9c69c3253 Author: Aaron Plattner Date: Tue Feb 12 13:24:38 2013 -0800 xrandr 1.4.0 Signed-off-by: Aaron Plattner commit 3e5f160c4198a5160be5e9a3f21ba3f4130d4318 Merge: dac72dbbc750 bd166184f6c1 Author: Aaron Plattner Date: Tue Feb 12 12:30:20 2013 -0800 Merge branch 'fixes' Conflicts: xrandr.c commit bd166184f6c1973ae2f5f99d040733db3e9e82cf Author: Aaron Plattner Date: Wed Feb 6 14:21:57 2013 -0800 Cast XID to unsigned int to suppress a printf warning Sorry I forgot about this in commit 138b6252c0cae6599b6c8a25ffa22ffe70f227c2. That change introduced a warning: xrandr.c|645 col 5| warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘XID’ [-Wformat] Fix that by just casting the XID to unsigned int. Signed-off-by: Aaron Plattner Reviewed-by: Daniel Dadap commit 7fd4f18b649f22fad4dbf9fc64b69b3e7f172207 Author: Aaron Plattner Date: Wed Feb 6 11:13:06 2013 -0800 Bug #37043: adjust refresh rates for doublescan and interlace These two flags halve and double, respectively, the effective refresh rate of a mode. Signed-off-by: Aaron Plattner Reviewed-by: Daniel Dadap commit d752d524027fbc20d9fdee06fed173e454f15370 Author: Aaron Plattner Date: Wed Feb 6 10:10:03 2013 -0800 Bug #29603: document that there might be multiple preferred modes The X server sorts the mode list for an output with preferred modes first, and specifies how many preferred modes there are by setting the npreferred field in the XRRModeInfo structure. Update the man page to refer to preferred modes in the plural, and mention that --auto and --preferred use the *first* preferred mode. Signed-off-by: Aaron Plattner Reviewed-by: Daniel Dadap commit b2f0bd198b1116e45389a6628b657b722b4102a4 Author: Aaron Plattner Date: Wed Feb 6 14:11:23 2013 -0800 Bug #14118: print usage() to stdout, proper errors for bad arguments Print the usage() text to stdout instead of stderr, and then only if -help is specified. Also allow --help for consistency. For other command line syntax errors, introduce a new helper function argerr() that prints errors of the form xrandr: %s Try './xrandr --help' for more information. and exits. Use that to print proper error messages. Signed-off-by: Aaron Plattner Reviewed-by: Daniel Dadap commit 0a26e076e10a3c7461d59c830cdc10688d66824f Author: Aaron Plattner Date: Wed Feb 6 13:08:58 2013 -0800 Bug #11397: check that numeric --orientation arguments are in range The only valid parameters to -o (--orientation) are 0, 1, 2, 3, normal, left, inverted, and right. xrandr converts the strings to numbers and then checks that they're within range, but doesn't validate them if it was numeric to begin with. Move the range check outside of the if statement so that out-of-range numeric values are rejected properly. Signed-off-by: Aaron Plattner Reviewed-by: Daniel Dadap commit dac72dbbc7501483eccec71bbf0db05a56756109 Author: Aaron Plattner Date: Fri Aug 24 21:43:13 2012 -0700 xrandr: Fix variable declaration warnings There are piles of places in the code where a variable shadows either another variable or a global function: xrandr.c:545:35: warning: declaration of ‘index’ shadows a global declaration [-Wshadow] xrandr.c:574:9: warning: declaration of ‘index’ shadows a global declaration [-Wshadow] xrandr.c:967:19: warning: declaration of ‘gamma’ shadows a global declaration [-Wshadow] xrandr.c:1329:16: warning: declaration of ‘gamma’ shadows a global declaration [-Wshadow] xrandr.c:2055:28: warning: declaration of ‘outputs’ shadows a global declaration [-Wshadow] xrandr.c:2068:29: warning: declaration of ‘outputs’ shadows a global declaration [-Wshadow] xrandr.c:2928:16: warning: declaration of ‘output’ shadows a previous local [-Wshadow] xrandr.c:2995:15: warning: declaration of ‘output’ shadows a previous local [-Wshadow] xrandr.c:3016:15: warning: declaration of ‘j’ shadows a previous local [-Wshadow] xrandr.c:3018:19: warning: declaration of ‘rotations’ shadows a previous local [-Wshadow] xrandr.c:3116:15: warning: declaration of ‘crtc’ shadows a previous local [-Wshadow] xrandr.c:3170:8: warning: declaration of ‘k’ shadows a previous local [-Wshadow] xrandr.c:3243:20: warning: declaration of ‘mode’ shadows a previous local [-Wshadow] 'index' and 'gamma' are C library functions: index (3) - locate character in string gamma (3) - (logarithm of the) gamma function The rest of these are either variables or function parameters. When possible, move the declaration of a variable into the block where it is used, including in cases where the same variable is used in multiple blocks but the later block doesn't depend on the value from the earlier block. In a few cases, rename the variable in the outer scope to be more specific (e.g. output -> config_output) so the more generic variable in the inner scope (e.g. the 'output' variable used to iterate over all outputs) doesn't have to change. Signed-off-by: Aaron Plattner Reviewed-by: Andy Ritger commit 138b6252c0cae6599b6c8a25ffa22ffe70f227c2 Author: Aaron Plattner Date: Mon Feb 4 16:17:24 2013 -0800 xrandr: look for providers by name or xid Use the name_t infrastructure to allow specifying providers by name, index, or XID. This means that numbers without a "0x" prefix will now be interpreted as a indices rather than XIDs. To match that, print provider XIDs in hexadecimal. Print an error if a provider-related option is specified and RandR 1.4 isn't supported. Make get_screen robust against being called multiple times. Signed-off-by: Aaron Plattner Reviewed-by: Dave Airlie commit a93b77b15fa2463c7fd06c6898b9c9f737c3ae8a Author: Aaron Plattner Date: Mon Feb 4 16:05:11 2013 -0800 xrandr: make providers a first-class citizen Create a struct _provider to match the existing output, crtc, etc. objects. Build that from a new get_providers() function. Use that to populate the list when querying the providers. Signed-off-by: Aaron Plattner Reviewed-by: Dave Airlie commit 8ce9d1fa48a7556e9aee090e5d72566dbb9a32f8 Author: Aaron Plattner Date: Mon Feb 4 15:20:21 2013 -0800 man: document provider options I hope I got the --setprovideroffloadsink parameters the right way around. Signed-off-by: Aaron Plattner Reviewed-by: Dave Airlie commit d07ef58f0cb6920dedc00c1e39cc6a5d0f31775e Author: Alan Coopersmith Date: Sun Jan 20 12:32:15 2013 -0800 Fix -Wformat warnings about passing longs where ints were expected Signed-off-by: Alan Coopersmith commit ee548dde0f5bcc6503ad2f74af5261fbf022dada Author: Alan Coopersmith Date: Sun Jan 20 12:28:04 2013 -0800 Mark fatal() and warning() as taking printf-style arguments Silences -Wformat-nonliteral warnings about them passing through unknown format arguments to vfprintf. Signed-off-by: Alan Coopersmith commit 77b03188b14cdef4523184a73b25fb2703d52685 Author: Alan Coopersmith Date: Sun Jan 20 12:24:24 2013 -0800 config: Add missing AC_CONFIG_SRCDIR Regroup AC statements under the Autoconf initialization section. Regroup AM statements under the Automake initialization section. Signed-off-by: Alan Coopersmith commit a9a92e85b2f8ea54855a3b45eb0882d7da50c1a8 Author: Colin Walters Date: Wed Jan 16 13:02:57 2013 -0500 autogen.sh: Honor NOCONFIGURE=1 See http://people.gnome.org/~walters/docs/build-api.txt Signed-off-by: Adam Jackson commit 4a15ed3b1edd22d67307620f2265faf365700519 Author: Adam Jackson Date: Wed Jan 16 13:03:39 2013 -0500 configure: Drop AM_MAINTAINER_MODE Signed-off-by: Adam Jackson commit 094b40e89707828df2bb7b204a97eed256a3c3fd Author: Pierre-Loup A. Griffais Date: Wed Dec 19 12:32:03 2012 -0800 xrandr: print primary output Sample output: LVDS-0 connected primary 1920x1080+1920+120 [...] Signed-off-by: Pierre-Loup A. Griffais Reviewed-by: Aaron Plattner Tested-by: Aaron Plattner Signed-off-by: Aaron Plattner commit b26fd532b3dab222956ea27eef4e41345978b5b2 Author: Andy Ritger Date: Fri Sep 7 17:58:46 2012 -0700 xrandr: generalize output property printing Signed-off-by: Andy Ritger Reviewed-by: Aaron Plattner commit 7a22279cadf7d1a2064cf985acc015401407d71c Author: Andy Ritger Date: Fri Sep 7 17:58:45 2012 -0700 xrandr: extend '--set' syntax to allow a comma-separated list of values Signed-off-by: Andy Ritger Reviewed-by: Aaron Plattner commit 7cb20881991c8bcf7e8fa0af6ad0f85682f98e1f Author: Dave Airlie Date: Fri Jan 20 17:40:41 2012 +0000 xrandr: add provider interfaces This adds an initial interface to list and configure offload and output providers. Signed-off-by: Dave Airlie commit a36e6d38ffd9831188758658ff36a0b88e43ba67 Author: Aaron Plattner Date: Fri Aug 24 21:02:26 2012 -0700 xrandr: Fix string constness bugs Sufficiently new versions of GCC treat string literals as "const char *" by default. This means that several places that assign, return, or initialize char* from a string literal generates a warning: xrandr.c:54:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:55:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:56:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:57:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:58:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:61:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:62:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:63:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:64:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:65:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:69:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:70:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:71:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:72:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:73:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:74:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:80:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:81:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:82:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:83:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:84:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:85:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:86:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:87:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:88:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:189:2: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:193:5: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:202:2: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:204:2: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:206:2: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:208:2: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:210:5: warning: return discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:359:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:360:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:361:5: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:593:23: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:1189:28: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:1191:28: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:1587:39: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:1588:30: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:1589:38: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:1590:48: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:1591:42: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:1592:25: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:2544:28: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:2546:28: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:2585:28: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] xrandr.c:3228:17: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default] Fix as many of these as possible. This introduces one problem: XRRSetCrtcTransform takes a non-const char* filter parameter even though it doesn't actually modify the string. Instead of trying to work around that, just live with the warning for now: xrandr.c:1459:9: warning: passing argument 4 of ‘XRRSetCrtcTransform’ discards ‘const’ qualifier from pointer target type [enabled by default] /X/include/X11/extensions/Xrandr.h:383:1: note: expected ‘char *’ but argument is of type ‘const char *’ Signed-off-by: Aaron Plattner Reviewed-by: Alan Coopersmith commit b501dd3adfac13e15e619898d4447d83b8301dd3 Author: Andy Ritger Date: Fri Aug 24 15:53:09 2012 -0700 xrandr: compute gamma-correction in [0,2^sigbits) The gamma-correction lookup table values are 16:16:16 X Colors, where the MSBs are programmed into the hardware lookup table. Rather than compute values over the entire range [0,65536) (where values below 2^(16 - sigbits) will receive the same hardware value), compute values over the range [0,2^sigbits) and left shift by (16 - sigbits) into the MSBs. Signed-off-by: Andy Ritger Reviewed-by: Aaron Plattner Signed-off-by: Aaron Plattner commit 90afd01788be7bf19e441a59dca0d8057c5267b1 Author: Andy Ritger Date: Fri Aug 24 15:53:08 2012 -0700 xrandr: fix gamma == 1.0 && sigbits != 8 The gamma-correction lookup table managed through XRR[GS]etCrtcGamma is 2^n in size, where 'n' is the number of significant bits in the X Color. Each element in the gamma-correction lookup table is a 16:16:16 X Color (i.e., in the range [0,65536) ). The significant bits of each component of each element in the lookup table are programmed into the hardware lookup table. Meaningful values in the gamma-correction lookup table are thus in the range [0,2^sigbits), where all values are shifted into the MSBs (i.e., left shifted by (16 - sigificant bits)). Signed-off-by: Andy Ritger Reviewed-by: Aaron Plattner Signed-off-by: Aaron Plattner commit 6bf48ae8d8db58ab74182383e54332f120f024c2 Author: Andy Ritger Date: Fri Aug 24 15:53:07 2012 -0700 xrandr: use 1/gamma to compute gamma-correction To compute a gamma *correction* lookup table, use the specified gamma value as the divisor in (1.0/gamma). This matches the semantics of xgamma(1) and the "gamma-value" and "{red,green,blue}-gamma" xorg.conf(5) options. For more details, see: http://www.poynton.com/PDFs/TIDV/Gamma.pdf (Gamma in computer graphics, page 17) http://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/common/xf86cmap.c:ComputeGamma() Signed-off-by: Andy Ritger Reviewed-by: Aaron Plattner Signed-off-by: Aaron Plattner commit 755234bd2ce0f3acde6507aba94b1e53a5a72f9b Author: Eric S. Raymond Date: Thu Aug 23 12:26:57 2012 -0400 Running text interspersed with options prevents DocBook translation; remove. The information the text conveys is not really needed at that point, either. It's duplicated later in the manual page. Signed-off-by: Eric S. Raymond commit b9d260a49961b5e311e77e8600e7e5a8f2e8d475 Author: Keith Packard Date: Tue May 1 21:53:02 2012 -0700 keystone.5c: cairo-5 box semantics changed default layout cairo-5c version 1.6 includes a new 2D box layout widget that needs widget stretch defined in both dimensions to create the desired layout. Signed-off-by: Keith Packard commit 1e5a973ad2da9aaf3c025656db4ba83ff9e6c207 Author: Aaron Plattner Date: Mon Apr 23 12:41:15 2012 -0700 Add a --scale-from option A typical case for wanting to specify a scale on an output is making your framebuffer be one size and scaling it to fill an output of a different size. Instead of making the user calculate the scaling factors to be specified by --scale, add a new option, --scale-from, that lets the user specify the framebuffer size directly. Compute the appropriate transform to achieve the desired target size. Signed-off-by: Aaron Plattner Reviewed-by: Andy Ritger commit 45b21c41ef3abd73de11d1adc6f5475105e1a5b7 Author: Pierre-Loup A. Griffais Date: Tue Mar 20 16:46:22 2012 -0700 xrandr: move transform limit checking after scaling This would trigger for legit scaled matrices, resulting in the wrong extents getting computed. Signed-off-by: Pierre-Loup A. Griffais Reviewed-by: Keith Packard Signed-off-by: Aaron Plattner commit 8ca08e32ee7daae75992cbf1f554ca9a389e5420 Author: Keith Packard Date: Wed Feb 29 16:26:25 2012 +1300 Update keystone program to run with new nichrome bits Will also work with old nichrome bits. Signed-off-by: Keith Packard commit 5161ba39a3c13caa5cab953a17f509a6a5b09e7b Author: Jeremy Huddleston Date: Fri Nov 11 11:34:38 2011 -0800 Include strings.h for strcasecmp Our minimum requirement for X11 is currently Unix98. Unix98 provides strcasecmp in . This commit fixes implicit declarations of this function on systems that closely adhere to the standard. Signed-off-by: Jeremy Huddleston commit e68059e9ecc4225360a522138aedcedad7fe117f Author: Keith Packard Date: Sat Aug 6 19:06:42 2011 -0700 xrandr: Preserve current mode when switching crtcs When switching output crtcs, preserve any current mode in preference to selecting whatever mode is currently in use on that crtc. Signed-off-by: Keith Packard commit 5185a18a016d9ccbfea3a3cdb314041268222708 Author: Adam Jackson Date: Wed Jul 20 14:34:19 2011 -0400 Document the rarer --newmode flags in --help output Signed-off-by: Adam Jackson commit 9e7a1f88de66c65cca1eb732278f76dab125f30e Author: Alan Coopersmith Date: Wed Jun 29 21:18:23 2011 -0700 xrandr 1.3.5 Signed-off-by: Alan Coopersmith commit a187677a93a215ccbba819f98425a6c682a50a6c Author: Jeremy Huddleston Date: Mon May 9 09:26:34 2011 -0700 find_mode: Search for the mode closes to the specified rate This was the intention of d9aeb4a7544ad4a33f6f54bc46bff5cdf231a986, but find_mode was still picking the first string match rather than the match with the closest refresh rate. xrandr.c:740:3: warning: Value stored to 'bestDist' is never read bestDist = dist; ^ ~~~~ Found-by: clang static analyzer Signed-off-by: Jeremy Huddleston commit 30e9137bf94f58f66cc6883b0a47eab3159c8be6 Author: Jeremy Huddleston Date: Sun May 8 16:42:50 2011 -0700 Dead code removal xrandr.c:2978:33: warning: Value stored to 'first' is never read if (!first) printf (" "); first = False; ^ ~~~~~ xrandr.c:2966:30: warning: Value stored to 'first' is never read if (!first) printf (" "); first = False; ^ ~~~~~ Found-by: clang static analyzer Signed-off-by: Jeremy Huddleston commit 1e48aad532aa19a35efbee24cddca4c43e02afe7 Author: Jeremy Huddleston Date: Sun May 8 16:35:47 2011 -0700 Dead code removal Removing the redundant setting of format = 32 in the XA_ATOM case. It was already set to that earlier whe it was assigned actual_format. xrandr.c:2770:3: warning: Value stored to 'format' is never read format=0; ^ ~ xrandr.c:2782:7: warning: Value stored to 'format' is never read format = actual_format; ^ ~~~~~~~~~~~~~ Found-by: clang static analyzer Signed-off-by: Jeremy Huddleston commit dd2a2e7dc918c57aae3df57118042e4362377243 Author: Jeremy Huddleston Date: Sun May 8 16:29:51 2011 -0700 Mark usage, fatal, and panic as _X_NORETURN xrandr.c:634:13: warning: Access to field 'next' results in a dereference of a null pointer (loaded from variable 'output') output->next = NULL; ~~~~~~ ^ xrandr.c:1214:6: warning: Access to field 'mode' results in a dereference of a null pointer (loaded from variable 'crtc_info') if (crtc_info->mode == None) ^~~~~~~~~ xrandr.c:1252:5: warning: Array access (via field 'outputs') results in a null pointer dereference crtc->outputs[crtc->noutput++] = output; ^ ~~~~~~~ xrandr.c:1638:33: warning: Access to field 'name' results in a dereference of a null pointer (loaded from variable 'output_info') set_name_string (&output_name, output_info->name); ^~~~~~~~~~~ xrandr.c:1725:10: warning: Access to field 'changes' results in a dereference of a null pointer (loaded from variable 'output') if (output->changes) ^~~~~~ xrandr.c:1848:10: warning: Access to field 'mode_info' results in a dereference of a null pointer (loaded from variable 'relation') if (relation->mode_info == NULL) ^~~~~~~~ xrandr.c:3194:11: warning: Array access (from variable 'mode_shown') results in a null pointer dereference if (mode_shown[j]) continue; ^~~~~~~~~~ Found-by: clang static analyzer Signed-off-by: Jeremy Huddleston commit d58d70f6781308de2f905b71a0bfcea1506b0008 Author: Gaetan Nadon Date: Wed Jan 19 10:06:56 2011 -0500 config: move man pages into their own directory Use services provided by XORG_MANPAGE_SECTIONS. Use standard Makefile for man pages. Signed-off-by: Gaetan Nadon commit 3b18de7f030b89bcbaa54686490c406f73f824d0 Author: Gaetan Nadon Date: Thu Jan 13 17:15:36 2011 -0500 man: replace hard coded man page section with substitution strings Signed-off-by: Gaetan Nadon commit 7c3b0664e6ee3c3e43724c3922257e1138accd7c Author: Gaetan Nadon Date: Thu Jan 13 11:15:48 2011 -0500 man: remove trailing spaces and tabs Using s/[ \t]*$// Signed-off-by: Gaetan Nadon commit b94179dd0538c73ff4628d43f4b8f492351ddd9c Author: Gaetan Nadon Date: Wed Jan 12 16:28:02 2011 -0500 config: replace deprecated AM_CONFIG_HEADER with AC_CONFIG_HEADERS This silences an Autoconf warning commit 275249f6d162c8ce8a080bef8a2955fd8e72b67c Author: Matthias Hopf Date: Mon Jan 10 17:56:16 2011 +0100 Add --current to usage. commit 2b67c3d80d1e7736cf4fe9f093ab604dc02ad7be Author: Alan Coopersmith Date: Sat Oct 30 11:28:41 2010 -0700 xrandr 1.3.4 Signed-off-by: Alan Coopersmith commit 46c3cb9103ecd6f73a2908bb93004658069639c5 Author: Alan Coopersmith Date: Sat Oct 30 11:26:40 2010 -0700 config: Remove unnecessary calls from configure.ac AC_PROG_CC & AC_PROG_INSTALL are provided by XORG_DEFAULT_OPTIONS now PKG_CONFIG_MODULES handles AC_SUBST of the CFLAGS & LIBS variables Signed-off-by: Alan Coopersmith commit 52016812038732a3aabc6dfb63ded9d07de703ee Author: Alan Coopersmith Date: Sat Oct 30 11:25:53 2010 -0700 config: upgrade to util-macros 1.8 for additional man page support Use MAN_SUBST now supplied in XORG_MANPAGE_SECTIONS The value of MAN_SUBST is the same for all X.Org packages. Use AC_PROG_SED now supplied by XORG_DEFAULT_OPTIONS The existing statement can now be removed from the configuration file. Use automake provided $(AM_V_GEN) and XORG_DEFAULT_OPTIONS provided $(SED) Enables silent rule and use platform appropriate version of sed. Signed-off-by: Alan Coopersmith commit 5b74ff83949432b8abb9453415426a515e45eb20 Author: Gaetan Nadon Date: Sat Oct 30 11:24:14 2010 -0700 config: update AC_PREREQ statement to 2.60 Unrelated to the previous patches, the new value simply reflects the reality that the minimum level for autoconf to configure all x.org modules is 2.60 dated June 2006. ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.gz Signed-off-by: Gaetan Nadon Signed-off-by: Alan Coopersmith commit c7b90939f0ffcad17a5cc6cf1e28f7b027feeba5 Author: Julien Cristau Date: Tue Oct 12 21:20:18 2010 +0200 Call QueryExtension before any other RandR function (bug#30806) Reviewed-by: Alan Coopersmith Tested-by: Alan Coopersmith Signed-off-by: Julien Cristau commit 051f912f1c009a2c318214e6b3e86fa5f576d0ff Author: Alan Coopersmith Date: Wed Sep 22 19:39:27 2010 -0700 Bug 29348 - dot clock parameter missing from --newmode in man page https://bugs.freedesktop.org/show_bug.cgi?id=29348 Signed-off-by: Alan Coopersmith Reviewed-by: Julien Cristau commit a06506ca5df0a69e0ca27845855187ff62b78a9d Author: Julien Cristau Date: Mon Jul 19 18:07:56 2010 +0100 Bump to 1.3.3 commit 2cc54b2f6280cc2e5519b572f960ecef36d750ac Author: Julien Cristau Date: Mon Jul 19 18:06:56 2010 +0100 Require xorg-macros 1.4 for XORG_INSTALL commit 7e6b0adcbd6c9e691b538f99536dcd7106ed1f6a Author: Julien Cristau Date: Mon Jul 19 18:05:37 2010 +0100 Kill cvs keyword commit 61fc9cc04e1ac179ac5e2cc4ff861bb362f0b801 Author: Eric Piel Date: Sun Jan 10 00:08:53 2010 +0100 xrandr: get gamma and brightness Even in verbose query mode, gamma and brigthness were not displayed. That's because they are not stored in the server the same way they are specified on the command line: they are stored as 256 * 3 u16 while the command line is 3 + 1 floats. Still, this is useful info for the users, and they don't care about how it's stored in the server. So we do a regression over the values stored to recover info in the same way as on the command line: gamma and brightness. Signed-off-by: Éric Piel Reviewed-By: Matthias Hopf commit b5627bb72b3ca2c7f5a702b7134a5c6dd4f83687 Author: Eric Piel Date: Sun Jan 10 00:08:53 2010 +0100 xrandr: fix maximum gamma set Gamma is an array of 3 16-bit values. Currently, the maximum value assigned is 255*256, which is only 65280. Make sure that when we set the gamma, the maximum value is 65535. It's slightly brighter but also helps to avoid kludges to detect clamped values when reading back the gamma. Signed-off-by: Éric Piel Reviewed-by: Matthias Hopf commit d138c73276226ce424d36e80ce745aa9461f110e Author: Gaetan Nadon Date: Thu Feb 11 10:08:07 2010 -0500 config: move CWARNFLAGS from configure.ac to Makefile.am Compiler warning flags should be explicitly set in the makefile rather than being merged with other packages compiler flags. Signed-off-by: Gaetan Nadon commit ac6606d8da914610446c5327813798bfbba4d6c2 Author: Éric Piel Date: Wed Jan 6 14:42:15 2010 +0100 xrandr: fix brightness to prevent gamma to overflow and to allow 0 With the new brightness option, gamma would overflow with values > 1, leading to rainbow looking screen. In addition, have the brightness by default to 1, so that specifying 0 actually does the expected behaviour of leading to a black screen. Signed-off-by: Éric Piel Reviewed-by: Matthias Hopf Reviewed-by: Mikhail Gusarov commit ccb3f8a42b25819cd1812f179544b52c2f03d1aa Author: Yann Droneaud Date: Tue Nov 17 15:39:02 2009 +0100 xrandr: Remove --clone / --extend support code Code handling --clone and --extend is not used. The usage message regarding those options was already commented out. Signed-off-by: Yann Droneaud Acked-by: Matthias Hopf commit 1f8e27cd71560c154f6b1f7472ae2518f5df10e0 Author: Matthias Hopf Date: Tue Jan 5 14:58:42 2010 +0100 Language fixes. commit 5f7d052d63875f059f5693c68ee9fdf559ad5300 Author: Yann Droneaud Date: Tue Nov 17 15:39:01 2009 +0100 xrandr: Use a prefix for enum type _policy and _relation like other enums in xrandr.c Try to apply the same coding style to enum _policy and enum _relation. This patch also workarounds bug #12958 . Signed-off-by: Yann Droneaud Acked-by: Matthias Hopf commit b481bd0df87c6b474d8c443b6590bbafac482485 Author: Mikhail Gusarov Date: Sun Oct 25 03:41:05 2009 +0600 Add --brightness for CRTC --brightness n.m adjusts gamma set for CRTC in order to compensate for overly bright or overly dark unmanageable outputs. Signed-off-by: Matthias Hopf commit 7d463218c584b683c9946cbff44bc69115eaa11b Author: Matthias Hopf Date: Sun Jan 3 00:40:19 2010 +0100 xrandr: add more information about the transform option in the manpage Add information about the transformation, stating it's a homogeneous coordinate transformation and adding the (simplified) pixel calculation formula. Also and an example of keystone shaping generated using the algorithm found in xkeystone. Based on a patch by Eric Piel Signed-off-by: Matthias Hopf commit 27f86db064a5ea60b942fd3d3ddeb462d980df9b Author: Dominik Jasiok Date: Tue Dec 22 10:48:04 2009 -0800 xrandr: check_strtod should return double, not int check_strtod performs error checking around strtod to ensure that arguments are correctly processed. However, it also accidentally(?) cast the result to int, which was then universally cast back to double by all callers. Narrowing and re-widening the type doesn't make any sense. Signed-off-by: Keith Packard commit df254d851cae1dcd1032e307bc828a5800e7342c Author: Gaetan Nadon Date: Thu Nov 26 09:19:54 2009 -0500 Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES Now that the INSTALL file is generated. Allows running make maintainer-clean. commit 22c90544537e661b71705c59e35616abb5aa4e55 Author: Gaetan Nadon Date: Wed Oct 28 14:09:08 2009 -0400 INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206 Add missing INSTALL file. Use standard GNU file on building tarball README may have been updated Remove AUTHORS file as it is empty and no content available yet. Remove NEWS file as it is empty and no content available yet. commit 35ffd6a8768e16d6fc7bc7c840e35a7802796b21 Author: Gaetan Nadon Date: Tue Oct 27 15:07:25 2009 -0400 Deploy the new XORG_DEFAULT_OPTIONS #24242 This macro aggregate a number of existing macros that sets commmon X.Org components configuration options. It shields the configuration file from future changes. commit a397f434db4f30e22534b8fe684b8f67f493db40 Author: Gaetan Nadon Date: Mon Oct 26 22:08:39 2009 -0400 Makefile.am: ChangeLog not required: EXTRA_DIST or *CLEANFILES #24432 ChangeLog filename is known to Automake and requires no further coding in the makefile. commit 436a873b54990b77ac8024e20284de53c58c7850 Author: Gaetan Nadon Date: Thu Oct 22 12:34:16 2009 -0400 .gitignore: use common defaults with custom section # 24239 Using common defaults will reduce errors and maintenance. Only the very small or inexistent custom section need periodic maintenance when the structure of the component changes. Do not edit defaults. commit b81a4976701606d1406ff56b91f13331e5f35860 Author: Yann Droneaud Date: Tue Nov 17 10:34:41 2009 +0100 xrandr: Remove test against RANDR_MAJOR/RANDR_MINOR xrandr.c uses structures defined in provided by 'libXrandr' package but tests structures availability through RANDR_MAJOR/RANDR_MINOR defined in provided by 'randrproto' package. Sometimes they are not in sync so it's safer to rely on checks made by configure script through pkg-config. In my test case, XRRPanning structure is not defined in Xrandr.h, RANDR_MAJOR is 1 and RANDR_MINOR 2 but xrandr.c try to use it anyway. (for the record, XRRPanning was added in libXrandr-1.2.91). Signed-off-by: Yann Droneaud Reviewed-by: Rémi Cardona commit b84560759141ed52b8779c184184f888e9be8b2f Author: Éric Piel Date: Mon Oct 26 14:11:02 2009 +0100 xrandr: do not segfault when "--scale" or "--transform" have no output "xrandr --scale 2x2" segfaults, because the --scale (and --transform) options do not check for an existing output. Make sure there is an output specified (like every other options). Signed-off-by: Éric Piel Signed-off-by: Matthias Hopf commit 34829957441a10f6b6e31141aa1018f7a72aeaf9 Author: Éric Piel Date: Mon Oct 26 13:57:10 2009 +0100 xrandr: make --query really the default option The manpage states that "--query" is the default action when nothing specific is requested. However, some options such as "-display" or "--screen" lead to do nothing by default. This makes sure that unless something specific is requested, query is done. This also restores the behaviour of --q1 to the same one as the old xrandr: also display the info on rotation and reflection by default. Signed-off-by: Éric Piel Signed-off-by: Matthias Hopf commit 07bf47f32b1f4c256e32b5b47ab52ef55605370a Author: Jeremy Huddleston Date: Wed Oct 21 12:47:21 2009 -0700 This is not a GNU project, so declare it foreign. On Wed, 2009-10-21 at 13:36 +1000, Peter Hutterer wrote: > On Tue, Oct 20, 2009 at 08:23:55PM -0700, Jeremy Huddleston wrote: > > I noticed an INSTALL file in xlsclients and libXvMC today, and it > > was quite annoying to work around since 'autoreconf -fvi' replaces > > it and git wants to commit it. Should these files even be in git? > > Can I nuke them for the betterment of humanity and since they get > > created by autoreconf anyways? > > See https://bugs.freedesktop.org/show_bug.cgi?id=24206 As an interim measure, replace AM_INIT_AUTOMAKE([dist-bzip2]) with AM_INIT_AUTOMAKE([foreign dist-bzip2]). This will prevent the generation of the INSTALL file. It is also part of the 24206 solution. Signed-off-by: Jeremy Huddleston commit 8d2702cae3b6a78cfd8d480dfb8209091917af2a Author: Alan Coopersmith Date: Thu Oct 1 14:54:29 2009 -0700 Add README with pointers to mailing lists, bugzilla, & git Signed-off-by: Alan Coopersmith commit 5da0cb3533aa829588b2e6d715d511691fa1e45f Author: Matthias Hopf Date: Thu Sep 10 13:18:35 2009 +0200 Bump to 1.3.2 commit e5861530a6c3bb6219217e5f3ddc71f13b9509c4 Author: Matthias Hopf Date: Thu Sep 10 13:17:56 2009 +0200 Add missing 'static's to get rid of warnings. commit ab875be43651befa654a24719f1ea365dde09073 Author: Bart Massey Date: Thu Feb 7 14:03:24 2008 -0800 changed a bunch of string to number conversions for reliability commit 25325aae2e80cb33af17682a6cd1bcd292a5f445 Author: Bart Massey Date: Fri Sep 4 15:36:51 2009 +0200 Warn if one of the outputs given did not exist commit 713a8ea5646f7c893b52afeb3c2443b21b837e46 Author: Matthias Hopf Date: Tue Aug 11 16:11:39 2009 +0200 Bump to 1.3.1 Also finally bump xrandr requirement to 1.3 commit b9166441bdb08ef76b9c6712da5902b0dcbf03f3 Author: Federico Mena Quintero Date: Mon Jul 20 16:44:52 2009 -0500 bfo#22864 - grab the server around all modifications to CRTCs We were not grabbed while disabling the CRTCs that should be off, so other clients could think that there was an intermediate stage with no enabled outputs. Signed-off-by: Federico Mena Quintero commit 68d5134142e3c616f3996c7ea8d08c887ce56118 Author: Éric Piel Date: Tue Jul 14 21:36:32 2009 +0200 xrandr: Document --nograb option Op 08-07-09 15:19, Matthias Hopf schreef: > On Jul 07, 09 22:02:51 +0200, Éric Piel wrote: >> Op 21-05-09 13:23, Éric Piel schreef: >>> This documents the --nograb option with whichever I could understand of >>> the advantages and drawbacks of grabbing the screen. >>> >>> Also fixes the formatting in the xrandr 1.3 options. >> Please review and apply. > > Please resend as attachment. > Please find attached the git patch. Thanks, Eric >From 34e7c1036ba0e0d7827563deaffea9371031fa0b Mon Sep 17 00:00:00 2001 From: Eric Piel Date: Thu, 21 May 2009 13:01:52 +0200 Subject: [PATCH] xrandr: Document --nograb option This documents the --nograb option with whichever I could understand of the advantages and drawback of grabbing the screen. Also fixes the formatting in the xrandr 1.3 options commit 73e38a31e5b7c68f8f3227a47d98ec55097999c7 Author: Matthias Hopf Date: Mon Jul 6 18:30:05 2009 +0200 Fix missing prototype warning. commit 3408ca77af6a45b15b89bdd1ce9d5aac9646f6b8 Author: Matthias Hopf Date: Mon Jul 6 18:28:23 2009 +0200 Report program version as well with --version. This has bitten us too often already (the infamous uncloning bug). commit 47502f66f7c51ad575d63f28de49f285c4de7062 Author: Adam Jackson Date: Wed Apr 1 11:03:10 2009 -0400 xrandr 1.3.0 commit beb228842c77fab4a446e028dd501a01f0fb3fd3 Author: Adam Jackson Date: Tue Feb 17 13:45:32 2009 -0500 Allow zero replies from GetPanning to mean panning is unavailable. commit 9418f5523bd923b122f6e67c33c40e0e9c29ab50 Author: Aaron Plattner Date: Wed Mar 4 15:49:10 2009 -0800 Set the screen config on the correct screen. Otherwise, "DISPLAY=:0.0 xrandr --screen 1 -s 1" fails. commit 39a16783a3d1c0c722b4b18fab60a91b9f6ed578 Author: Matthias Hopf Date: Fri Mar 6 14:49:43 2009 +0100 Revert "Move outputs among crtcs as necessary. Fixes 14570" This reverts commit 4dcc8ae1a6903434def1a2706f7c68ff9e2a17c4. The commit broke uncloning completely again. Conflicts: xrandr.c commit 880f045202d1e70368b855c3783604e19be946b8 Author: Julien Cristau Date: Sun Feb 1 14:39:30 2009 +0100 Bump to 1.2.99.4 commit 010dfc4bdd309256aecd006bb2b5b6937c2a119c Author: Julien Cristau Date: Sun Feb 1 14:34:15 2009 +0100 Document the --primary and --noprimary options commit 48014498d275a9aab986b4bf295538a5b38ddfeb Author: Julien Cristau Date: Sun Feb 1 14:12:21 2009 +0100 Document the --current option commit 909defc8a2b009ab845d875ba10e1ca01fb9d648 Author: Keith Packard Date: Fri Jan 30 20:37:34 2009 -0800 Add --noprimary option commit 6c70e0ee693ea293e8674d049249b462f3d36855 Author: Keith Packard Date: Fri Jan 30 20:11:10 2009 -0800 Add --primary option Signed-off-by: Keith Packard commit 77891e7900765a320ad3d43b56bbb1f3081b6582 Author: Keith Packard Date: Fri Jan 30 20:11:02 2009 -0800 Add --nograb option Signed-off-by: Keith Packard commit 6f3e2bb207cff069791811ef2bbe7798759ed810 Author: Keith Packard Date: Tue Dec 9 21:26:50 2008 -0800 Add --current option to use new XRRGetScreenResourcesCurrent API Signed-off-by: Keith Packard commit d98d1f4055d8fbae1dc8d8c54467bfef21010694 Author: Matthias Hopf Date: Fri Jan 30 17:46:05 2009 +0100 Several fatal() were missing \n. commit 9ea6e4210d49c13991a7d07e54f6f59e3dc8ce72 Author: Éric Piel Date: Mon Jan 19 16:18:46 2009 +0100 Add docs for --transform and --scale. The new --transform and --scale options were added, but not yet documented. This includes also an example of usage of panning and scaling at the same time. commit 4d381d6a88fe147f8b6eabd765a2f42c6402d8c6 Author: Paulo Cesar Pereira de Andrade Date: Mon Jan 26 16:40:59 2009 -0200 Correct make distcheck and gcc/sparse warnings. commit 7509ecb290689e0b1d5e1000c9fbd312f1efb4ca Author: Maarten Maathuis Date: Mon Jan 5 19:47:21 2009 +0100 Stay away from doublescan modes unless a refresh rate is specified. commit f77ad847c0d3f8f0c6e8ffbf0bec39e5e9c5ded0 Author: Maarten Maathuis Date: Mon Dec 22 19:46:24 2008 +0100 Fix gamma computation. - The previous version sometimes overflowed. commit 5ddde7151841a8db99a2f38689a176114b2a45e5 Author: Matthias Hopf Date: Thu Dec 18 16:09:39 2008 +0100 Print multiple Atom and INT32 properties. Improve output formating of strings. commit 96af64f0de71f4149740b486baaefca744bb1bc1 Author: Maarten Maathuis Date: Wed Dec 17 17:18:14 2008 +0100 randr-1.2: support gamma changes. commit 9b7a2a3d4ac7891bd5372a581e6a55a1c81497ef Author: Matthias Hopf Date: Mon Dec 15 20:39:43 2008 +0100 Bump to 1.2.99.3 commit e80add8a407a9327bda209ff11a97dc3336e0cab Author: Matthias Hopf Date: Mon Dec 15 21:00:55 2008 +0100 Add keystone.5c to EXTRA_DIST commit c98591b0bf4753c4c075eccde6023ef644f8bf96 Author: Matthias Hopf Date: Mon Dec 15 20:36:40 2008 +0100 Don't trash panning area, except if --panning or --fb is given. Almost anything used to reduce the screen size to the current mode size, which is counter-productive when panning is active. commit 8cb63b6df9e46e8b06a57cb54ad460355b604399 Author: Matthias Hopf Date: Thu Dec 11 17:09:47 2008 +0100 Panning tracking areas describe full screen if set to 0. Use it as default. Also improve reduced output on default tracking and borders. commit b5efbb31ec7c27895507add4497dbfc87f930bb3 Author: Adam Jackson Date: Mon Dec 8 16:37:59 2008 -0500 Accept --props synonym for --prop commit 57cabac91099a8abd5afad75de64e54930c078ec Author: Matthias Hopf Date: Mon Dec 8 12:24:37 2008 +0100 Only set transforms if actually changed. Re-enables other crtc settings if transforms are not supported. commit 970f689651fc86fa7a2ba24f0fab5f86f01af349 Author: Matthias Hopf Date: Thu Dec 4 17:47:05 2008 +0100 Add manpage entry. commit d030ae78e8516b916e9ea1ea81e3b4859bf35875 Author: Matthias Hopf Date: Thu Dec 4 15:57:22 2008 +0100 Bump to 1.2.99.2, RandR requirements to 1.2.99.2 commit f6b5862f87ba7e1729c46136ef7754a06301853f Author: Matthias Hopf Date: Fri Nov 28 17:16:11 2008 +0100 Add panning support. commit 1dc67ca918446cb7db4819f60f36e7bc6f4c047b Author: Matthieu Herrb Date: Sat Dec 6 11:40:53 2008 +0100 Don't use GNU make only constructs. commit 7963d4217c12d2e4b0c38ad4ff185462784609f7 Author: Julien Cristau Date: Mon Dec 1 23:27:51 2008 +0100 Require libXrandr 1.2.91 commit ba78e14c8c43a141fc5227e7bb75d6cfd0f70dba Author: Julien Cristau Date: Mon Dec 1 21:45:47 2008 +0100 Fix build outside of the source dir commit 63ba316bcbe8ad61ba63d9fe62c82e7d56dcc399 Merge: a813c4da7f0b 1b95e32b4b0a Author: Julien Cristau Date: Mon Dec 1 21:33:35 2008 +0100 Merge branch 'transform-proposal' of git.freedesktop.org:/git/xorg/app/xrandr commit 1b95e32b4b0a4a114e0fbebe8a18316d2f9010cf Author: Keith Packard Date: Fri Nov 14 14:14:24 2008 -0800 Add --scale and --transform to --help output commit e9a5d1c598cd0440f062240430a9b86b4d514ada Author: Keith Packard Date: Fri Nov 14 14:13:51 2008 -0800 Check return value from XRRGetCrtcTransform XRRGetCrtcTransform will return 0 if the X server does not support this request. commit a813c4da7f0b166ee9001fa97c5d8d64e5b5b560 Author: Alan Coopersmith Date: Tue Aug 19 09:39:00 2008 -0700 Man page typo fix commit 8ef4595aef15b7326822849a50c273f2a2b4ba30 Author: Julien Cristau Date: Fri Aug 15 21:23:13 2008 +0200 Manpage typo fixes commit 977275a13be0687efc3db1fd3763174ff1256210 Author: Eric Piel Date: Sun Aug 10 23:28:25 2008 +0200 update the manpage Describe all the options supported, including: --dryrun, -display, --q1, --q12, and --rate for 1.1 Describe all short and long version of the option. Use the usual man style for the option arugments. Move the four --*mode options out of the output section as they are independant of an output. Mention cvt for computing modelines. Gives some examples. commit 3046799a06ecb79211ef0f4a2db9de4eec7233fb Author: Egbert Eich Date: Sun Aug 3 13:24:49 2008 +0200 Fix for 64bit: feed a pointer to the right size variable to scanf(). XID is unsigned long, however %x in scanf takes a pointer to an unsigned int. Thus with XID xid, a sscanf(..., "0x%x", &xid) will most likely produce the wrong results. commit 0d2082e9eb25cb7410309eed908b7f95abb8da79 Author: Keith Packard Date: Tue Apr 1 23:46:02 2008 -0700 Exit when select output is not available commit 18a189993b3df8bc54a79e0d62240ef203d6f34f Author: Keith Packard Date: Tue Apr 1 23:44:50 2008 -0700 Fix up xkeystone to use current screen/output settings commit 9e8860f9231926090462ea20132cc9e1d64e5fe4 Author: Keith Packard Date: Sun Mar 30 19:03:53 2008 -0700 Execute xrandr to set keystone correction commit 206bfbea4ebe854fdfa66e8a6fbd9296b6004c0e Author: Keith Packard Date: Sun Mar 30 19:03:29 2008 -0700 add --transform none to reset to identity commit 443e1f80c885133ae6df590f1a7663833c76b7f3 Author: Keith Packard Date: Fri Mar 21 23:29:41 2008 -0700 Build and install xkeystone program from keystone.5c commit a7a7eea510b5a87c1e12516fadae4d13bd26e0a0 Author: Keith Packard Date: Fri Mar 21 23:26:30 2008 -0700 Track toolkit name change (chrome->nichrome) commit 74dae9d4b06369a1863e7a68b7b3772751e06ff1 Author: Keith Packard Date: Fri Mar 21 03:17:44 2008 -0700 Add keystone.5c program to help compute transforms. commit 46bd35dd9004c0f9f47dc44b77a8c28e3ab7ced1 Author: Keith Packard Date: Fri Mar 21 03:17:40 2008 -0700 Make screen undersize a warning instead of an error commit b816bf38b418618c2f1cb5ded09aa3b346f8eb15 Author: Keith Packard Date: Tue Mar 18 16:04:34 2008 -0700 Add --transform to pass arbitrary transforms to the server commit 3809884530223e32f7026ec987257cb91e2122a9 Author: Keith Packard Date: Tue Mar 18 16:04:22 2008 -0700 Eliminate inverse matrix from randr transform protocol It is easier, and potentially more precise, to compute the inverse in the server where everything can eventually be kept in floating point form. commit 854a7c2916455fec5ec1ba87576e26706d151381 Author: Keith Packard Date: Mon Mar 17 13:59:40 2008 -0700 Transform mode bounds when computing sizes. Ensure screen sizes are compared with projected mode image, including rotation and transformation. commit bed3da4feaa505a5b50a4c94b0e6661bdac1fcbd Author: Keith Packard Date: Sat Mar 15 00:35:08 2008 -0700 Manage transform filters. Use bilinear for non-identity scale. This involved creating a compound transform datatype to hold all of the relevant transform and filter information. Adding arbitrary transforms should be fairly easy at this point. commit ba35bb5d306f4edf9a47b92f249132a0814f5db1 Author: Keith Packard Date: Mon Mar 10 21:19:41 2008 -0700 Add output scaling using the 1.3 transform requests commit 4dcc8ae1a6903434def1a2706f7c68ff9e2a17c4 Author: Hong Liu Date: Mon Mar 10 21:37:09 2008 -0700 Move outputs among crtcs as necessary. Fixes 14570 This patch makes new requests override existing crtc allocations. Outputs with restricted crtc usage can now force existing outputs to switch automatcially. commit 7465357396e2f32325791e27f28cbbe9753db3ab Author: Adam Jackson Date: Fri Mar 7 16:38:28 2008 -0500 xrandr 1.2.3 commit 4450756d2d1d86f3c0bfaef81f6265f795468f32 Author: Brice Goglin Date: Sat Dec 15 00:59:00 2007 +0100 Clarify the ability to manipulate multiple outputs in the manpage commit 5c2a003adab4aaa979a095e18793b01cfa694bf4 Author: Brice Goglin Date: Sat Dec 15 00:49:35 2007 +0100 Allow the same output to be specified several times on the command line Without this xrandr --output FOO --mode 1024x768 --output FOO --rotate left only changed the mode but did not apply the rotation. Reported by Marc Haber in http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=455225 commit ab5e07fdd10f6340289b786414804a034ca98f0b Author: Matthias Hopf Date: Fri Nov 30 16:13:51 2007 +0100 Add another test known to fail. commit 4bc84c331f4f0f0658ad1f6c0107e3e6af2a7911 Author: Matthias Hopf Date: Thu Nov 29 19:54:34 2007 +0100 Add informational output for known issues. commit 3fb533ff896bd642200e7242c4d35a887faeca74 Author: Matthias Hopf Date: Thu Nov 29 19:54:03 2007 +0100 Add more tests, mostly regarding crtc switching and uncloning. commit 20c8a60950cb5b4ddef305dc9822bec1c33e938c Author: Matthias Hopf Date: Wed Nov 21 16:48:23 2007 +0100 Oops. Fix missing space introduced by last commit. commit 3347c849462b737a873a279c24d17c873667c821 Author: Matthias Hopf Date: Wed Nov 21 16:47:08 2007 +0100 Be more robust in test case if mode database is borked. If modes are reported multiple times per output only bother for the last. commit 81e8f2f5673befded3320424f4511e322d41c80b Author: Matthias Hopf Date: Wed Nov 21 16:41:33 2007 +0100 Some minor issues in test case fixed. 'my' not being used correctly. Some lines of xrandr --verbose output missing in failure case. If order of outputs change in xrandr -q output they are sorted into original order now. commit 3a27185879e7a9288de960ccb26a48104cf592e3 Author: Matthias Hopf Date: Tue Nov 20 13:03:07 2007 +0100 More tests for ambiguous xrandr output. commit c9bd9721e162e4d9d83dd60400c75d4cc98090bd Author: Matthias Hopf Date: Mon Nov 19 20:06:39 2007 +0100 Use IDs for mode selection instead of hand-crafted x@ strings. Some machines provide e.g. multiple 1024x768@60 modes with /slightly/ different timings. Often only one of them can be used on multiple outputs. commit a05d2b6e3ffd81ecc0be98b8d2b758505fb55f3f Author: Matthias Hopf Date: Mon Nov 19 12:24:04 2007 +0100 Improved test script. Allow for outputs in "unknown" state. Check xrandr return value. Output full xrandr --verbose output if test failed. commit e15a527b6cf1e66709eae4547c8e8bd3402362fe Author: Matthias Hopf Date: Mon Nov 12 15:25:44 2007 +0100 Add xrandr test suite. At the moment it only tests setting one output at a time, it should be improved to add some multi-output setting as well. Also it only tests clone modes at the moment, no multi-monitor setups. commit f7aaf8947a0f216ffedc7040b0a1ef153b471425 Author: Matthias Hopf Date: Mon Nov 12 15:19:52 2007 +0100 Always reset other outputs using the best crtc. pick_crtcs_score() didn't set up crtcs references correctly if anything but the last output resulted in the best score. commit 307f3686d3d517cb29b8e66d8ad2ff76a48748b7 Author: Matthias Hopf Date: Mon Nov 12 15:18:30 2007 +0100 Verify crtc against previous config. When selecting a crtc for an output, it doesn't check for already attached outputs in check_crtc_for_output(), and so may select an crtc that is already in use. E.g. when changing from a cloned mode the displays won't be split up to different crtcs, but the same crtc will be used, changing the resolution for the unspecified display as well. commit 4834439ce62e41204367cf5356a7a1719870791f Author: Matthias Hopf Date: Thu Oct 11 16:54:40 2007 +0200 Build ChangeLog from git-log automatically. commit 2fa28afb035cf2d2efb077db58d3858c57189be4 Author: Adam Jackson Date: Tue Oct 2 11:06:18 2007 -0400 Death to ChangeLog commit 0cfaad401711092f8858cdec64e4d4f33023f398 Author: Adam Jackson Date: Tue Oct 2 11:06:02 2007 -0400 Update COPYING commit 06d7272d845033fe3c6f0625cce5a32e7be636a7 Author: Brice Goglin Date: Thu Aug 9 19:06:37 2007 +0200 When invoked with no option, xrandr dumps existing modes commit b9b2fbbf7a7dd156d1fdffac2e4a4046f58baabb Author: Brice Goglin Date: Thu Aug 9 19:04:58 2007 +0200 Add *current and +preferred to the --verbose output commit 200491c1fad5ea1a733dfbac799a2ebea0a2f23c Author: Keith Packard Date: Wed Jul 4 20:05:03 2007 -0700 Bump to 1.2.2 commit 9db36331a2acafbf2dab05f481ce16ab094fde52 Author: Keith Packard Date: Wed Jul 4 20:04:29 2007 -0700 Print out mode flags in --verbose mode commit 49058de9b743f5196f97fb13cd9a695087b1299c Author: Keith Packard Date: Wed Jul 4 19:41:32 2007 -0700 Mark 1.1 options as inconsistent with 1.2 options commit c58e79a9c4c3967fb31a49a610a37b5797426415 Author: Keith Packard Date: Thu Jun 21 15:57:37 2007 +0100 Document 1.2.1 options commit 0499ce5ed6378bc68cbf8eafc9932ddf495ae708 Author: Keith Packard Date: Sat Jun 30 14:00:30 2007 -0700 When simple CRTC allocation fails, search all available configs. When enabling an output, if there isn't an idle CRTC available, try to reconfigure existing outputs to make things work. commit 0f2014e67193eb0f8e12ab1c3d5cae8991ba439d Author: Keith Packard Date: Sat Jun 30 13:09:45 2007 -0700 Clean up code structure a bit commit 63d385f2c24c522d974652da138a83d78014713e Author: Alan Coopersmith Date: Thu Jun 21 09:35:53 2007 -0700 Add *~ to .gitignore to skip emacs & patch droppings commit 4bd2f4004a6f75a7e4cb32b9e320e680f8839748 Author: Alan Coopersmith Date: Thu Jun 21 09:34:53 2007 -0700 Man page formatting and typo fixes commit b0812f8efe448c85979a9f5fab4a5a4e0c0e78d0 Author: Keith Packard Date: Thu Jun 21 11:37:56 2007 +0100 Update to version 1.2.1 commit 739f01957c8ebd3b7bcecfd7ad8174884561f7db Author: Aaron Plattner Date: Wed Apr 25 11:59:48 2007 -0700 Fix bugs found by compiling with -Wall. Also fix some unused variable warnings. commit 8e43df335679c71930465e4c58c0bd14d9add29a Author: Aaron Plattner Date: Wed Apr 25 10:52:19 2007 -0700 Fix a typo. Make mode flags case insensitive. Improve error messages. commit 49aab1e0e4cb2226d5bcc8e4e6217309fd23ce52 Author: Keith Packard Date: Fri Apr 6 03:36:27 2007 -0700 Skip relative positions for outputs without modes. An output without a mode is turned off; do not try to position it. commit 86d9b15cccc4d21ad5e5d34d7e7b82a50903939b Author: Keith Packard Date: Sun Mar 25 23:44:01 2007 -0700 Support XA_ATOM properties (like TV_FORMAT). Atom properties have lists of valid values that are all atoms, so display those. Also, fetch property data and use that to determine which format new property values are supposed to be in. commit dba14af8328eaaad716d1c27a5514df285d8d4cc Author: Keith Packard Date: Fri Mar 23 01:21:21 2007 -0700 Add --set option to set output properties. Numeric values are set as XA_INTEGER format 32 values, everything else is set as an XA_STRING format 8 value. commit ca7a5bb5691ecd1d8da6def373c793aa7a07dbbe Author: Keith Packard Date: Thu Mar 15 20:57:17 2007 -0700 Bounds check -s argument to be 0 <= index < nsize Print a nice error message when the -s option is passed a number out of bounds. commit 0cbbc7804781c2e55899ba9271365735c4a2b544 Author: Keith Packard Date: Thu Mar 15 20:56:15 2007 -0700 Make --q1 output RandR 1.1 query information. --q1 required a --query option to actually output any information. commit 7ae11b66cc26395d34070013e23813db3ca3e55f Author: Keith Packard Date: Thu Mar 15 20:55:30 2007 -0700 Make --auto after --output only affect the output. --auto has two meanings; if presented before any --output flags, it requests that connected-but-disabled outputs be enable while disconnected-but-enabled outputs be disabled. After --output, --auto simply asks that the mode used for the output be automatically selected. Mixing these two operations is not a good default. commit a53cc9b37c40dca936037a89013253f37c9a05ee Author: Keith Packard Date: Mon Mar 12 22:47:39 2007 -0700 Add --addmode and --delmode commands to edit list of modes per output. --addmode inserts into the list supported by , while --delmode removes a mode. commit dca4bd66b166b64314993aba34a3080c6953ac12 Author: Keith Packard Date: Mon Feb 19 17:12:24 2007 -0800 Add --newmode/--rmmode to create/destroy user modes. The syntax may be a bit hard to work with, but these serve to test the server infrastructure for custom modes. commit 9fd6aa1445a8f1e721ba8cdcd1ac12375d6e5a26 Author: Tilman Sauerbeck Date: Fri Mar 9 10:12:17 2007 +0100 Fixed alignment of the clones list. commit 3c44d68d78d8bddf69b5bd1a00f854d8cde971bb Author: Keith Packard Date: Wed Feb 21 11:24:35 2007 -0800 Add --same-as option to match output positions. This provides another positioning option that makes two outputs appear at the same location. commit 8a0c3b748b0e94c97fbc2a7449c6740b8acfe394 Author: Keith Packard Date: Sun Feb 18 21:27:55 2007 -0800 Update version number to 1.2.0 for release. commit 13cef2baa884039e96f5dfd9245bb949aed99448 Merge: 065f09cc304d a175972de6fb Author: Keith Packard Date: Sun Feb 18 21:26:50 2007 -0800 Merge branch 'origin' commit 065f09cc304d0c70eaf3cf6f3ff21e712e41d205 Author: Keith Packard Date: Sun Feb 18 21:25:54 2007 -0800 Require only libXrandr 1.2.0, not 1.2.0.0. Four digits seems excessive in a library version number. commit a175972de6fbe5426fb5c6bee03112678f0a9548 Author: Keith Packard Date: Thu Feb 15 23:07:34 2007 -0800 Select crtc which can be cloned to outputs which will be in use. Correct crtc selection algorithm to choose a crtc which will be used by outputs which can all share the same crtc. Also, make randr 1.0 commands work even when --verbose is specified, and terminate event loop in that case when the screen change event is seen. commit d707822aab19a0a8fe08f03300fdd9d4e206871e Author: Keith Packard Date: Sat Feb 10 18:27:06 2007 -0800 Selecting a crtc by index was failing to match a crtc. --crtc would fail to match because of a logic bug using & instead of &&. commit 89bf2c3c0e17c67adc3e2fdca54f0e8254dc8968 Author: Keith Packard Date: Sat Feb 10 16:14:58 2007 -0800 Display set of available CRTCs per output in --verbose mode. commit 067cafb5cda0aa6e34773e888fd469ff657760c2 Merge: 7c25c245bceb b0a00df69f83 Author: Keith Packard Date: Wed Jan 31 15:25:35 2007 -0800 Merge branch 'randr-1.2' Merge support for RandR 1.2 changes to the xrandr program along with documentation for the new options. commit b0a00df69f832ada40be6bd6973835439a698440 Author: Keith Packard Date: Wed Jan 31 15:22:02 2007 -0800 Update documentation to include all RandR 1.2 options. Also, require libXrandr version 1.2.0.0 or better. commit 6b9310d66eed59527d4002294be13884a7cbeacc Author: Keith Packard Date: Tue Jan 30 20:35:58 2007 -0800 Missing return statement from output_rotation. output_rotation was returning garbage making the available output rotations display incorrectly. commit 5c3b6b1013c7565c40e82bfc0514a3dd80aec2d8 Author: Keith Packard Date: Tue Jan 30 20:16:46 2007 -0800 Remove xrandr12.c app now that xrandr.c has RandR 1.2 support. commit eaf3e459d7760bbcb3c7f7c9b23b1e386189c71e Author: Keith Packard Date: Tue Jan 30 00:10:23 2007 -0800 Add --reflect option for RandR 1.2 reflection selection. Also, display available rotations after current rotation commit 8ecc6c034836a6fb6df0e2ad24429f506bf82e37 Author: Eric Anholt Date: Tue Jan 16 10:48:01 2007 -0800 Add display for 32-bit integer properties, such as backlight. commit 4112d13d7b15150e33687b687604c3a72188c066 Author: Keith Packard Date: Mon Jan 1 17:04:42 2007 -0800 Mode on CRTC may not be present for any output. When an output gets disconnected, the current CRTC mode may no longer be listed as valid for any output, but will still be listed for the screen. Search for current crtc mode in the screen list rather than the per-output list. commit 6ef7b2deafd09ae1a4b159f3c2e6e9db64bf01dc Author: Keith Packard Date: Sun Dec 31 23:02:12 2006 -0800 Using %lf to read float overwrote adjacent variable. Just use floats everywhere and %f instead. commit f6073333dcfb6989ff8793854fb42e08388444c5 Author: Keith Packard Date: Sun Dec 31 13:55:14 2006 -0800 Add rotation/reflection status to 1.2 query output. The previous cleanup had left these values missing from any output. Also it now reports the effective size of the mode within the screen. commit 5d2a76b70b7b59a45655b25db79d75cb08fe671d Author: Keith Packard Date: Sun Dec 31 13:38:40 2006 -0800 Clean up RandR 1.2 query output. Make brief mode list just mode names and refresh rates. Add --prop/--properties flag to show properties. Add --q1 flag to force showing pre-1.2 data. commit d9aeb4a7544ad4a33f6f54bc46bff5cdf231a986 Author: Keith Packard Date: Sun Dec 31 12:45:25 2006 -0800 Add --rate support to RandR 1.2 mode selection. Search for mode closest to specified rate for each output and use that instead of the one with the first matching name. If no rate is specified, the first one still matches allowing the driver to place preferred rates first in the list. commit c04d69cbd8a8a96862356afcda6ee679d663a524 Author: Keith Packard Date: Sun Dec 31 11:58:11 2006 -0800 Grab server while applying changes. Applications that respond to screen size changes by quering Xinerama information need to be blocked so that they see the entirety of the changes rather than just the screen size shift and not the crtc changes. commit 8e78af971048db711163ea297153703b4f37f3c9 Author: Keith Packard Date: Sat Dec 30 21:49:40 2006 -0800 Enable global --auto flag. Allow output name for --dpi switch. --auto at the global level checks for output status changes and automatically configures changed outputs. --dpi with an output switch uses the specified output as the source of the dpi information. commit f7a3e478a6a5d59a2bbcd6dc416639f93a0520fd Author: Keith Packard Date: Sat Dec 30 19:41:48 2006 -0800 Use Bool type. Position relative to disabled output is 0,0. Switch uses of int that are strictly boolean to Bool. Instead of making attempts to set position relative to a disabled output an error, just place the output at 0,0. commit cb017692883daf64e0cf442a39b33eaafed0e420 Author: Keith Packard Date: Sat Dec 30 17:34:46 2006 -0800 Restructure RandR 1.2 support to handle relative placement. Ok, really, this is mostly a rewrite of the RandR 1.2 support. First, collect commands from command line arguments. Next, fill in existing configuration from X server. Calculate new configuration. Apply configuration, if anything fails, revert to previous configuration. Still left -- pure --auto, and --extend/--clone options. commit b9dee113ce4105c1cf25e3c417c616c024aea823 Author: Keith Packard Date: Fri Dec 29 00:55:37 2006 -0800 Make query return 1.2 information if available commit 90e4a4c13957bd003294f64b86460813dd38a3de Author: Keith Packard Date: Thu Dec 21 17:37:20 2006 -0800 Accept hex mode numbers as well as mode names. Sometimes mode names are ambiguous; this lets the user specify modes by XID. commit e8f7047885ec85096a3f35b9cfb20386104fdc55 Author: Keith Packard Date: Tue Dec 19 16:27:46 2006 -0800 Actually respect the --fb option commit 7b32611632ab08b6a123db5df1c2b919b3a12104 Merge: a0df3aa81205 4bb1a9cd6f9c Author: Keith Packard Date: Tue Dec 19 15:58:38 2006 -0800 Merge branch 'randr-1.2-origin' into randr-1.2 commit a0df3aa81205b35ff8d9541c036cfd158cbd99ed Author: Keith Packard Date: Tue Dec 19 15:58:21 2006 -0800 Correct format for sscanf to double variable "dpi" commit 4bb1a9cd6f9cc3ed61d7913528afa3f573092833 Merge: b6c03827bae7 6ef400f35d7d Author: Keith Packard Date: Wed Dec 13 11:36:36 2006 -0800 Merge branch 'randr-1.2-origin' into randr-1.2. Detect invalid mode. Invalid mode test was checking wrong mode index. Also, print more informative error message when this occurs. commit b6c03827bae74ef5b9517c4246b0165dad8ee780 Author: Keith Packard Date: Wed Dec 13 11:27:30 2006 -0800 Name CRTCs by index or id. Use current CRTC to get current mode. CRTCs have no intrinsic name, so let users provide either the number in the list or the XID when referring to them explicitly. When no mode is specified, look up the current CRTC for the output and use that mode, instead of using the mode on the target CRTC. When switching an output from one CRTC commit 6ef400f35d7d8712d1ad1efd87a8a3cb8bfacd96 Author: Keith Packard Date: Wed Dec 13 09:53:17 2006 -0800 Add --preferred and --auto support. --preferred selects the 'best' mode for the monitor automatically, either by looking for a preferred mode, or selecting one which is closest to the current screen DPI. --auto checks connected status and disables the output if disconnected, otherwise it enables it with the preferred mode (as if --preferred). commit c69c3080febd8617349f88557c3c04388a13a76c Author: Keith Packard Date: Tue Dec 12 09:54:52 2006 -0800 mark disabled crtc as changing, set rotation to 90 for disabled crtc. --off code was not correctly finding and marking the to-be-disabled crtc, and the disabling code was sending an uninitialized rotation value to the server when no outputs were connected. commit 6be56cd10d934e496004f9ffd377225fd179f4b1 Author: Keith Packard Date: Mon Dec 11 00:39:48 2006 -0800 Update manual, elide unsupported options from usage, remove xrandr12 from build commit 624c75e8c250b33a81890c8f0da741a13ad4e7d1 Author: Keith Packard Date: Mon Dec 11 00:23:15 2006 -0800 Add RandR 1.2 support to plain xrandr app. primitive for now commit 7c25c245bceb0474541fe7a2615a4f665842ac32 Author: Jeremy C. Reed Date: Sat Dec 9 06:32:19 2006 -0600 Document -v switch. commit 2a32fa8cf8550a3a30871d25a23af07f65646c47 Author: Keith Packard Date: Tue Nov 21 01:17:38 2006 -0800 Track RandR output property changes commit 795173d2b9b94a3468db277102b4898b4e5a1ead Author: Keith Packard Date: Thu Nov 16 22:14:33 2006 -0800 properties are stored in unsigned char arrays commit 2df4352bb43e155977f8d4c0b53771cb0085ab74 Author: Keith Packard Date: Thu Nov 16 11:45:51 2006 -0800 Remove RandR output options. Output options are to be replaced with properties. commit 643787365fd716b902b597b67b2ec228dacfc862 Author: Keith Packard Date: Wed Nov 1 10:57:24 2006 -0800 Re-indent to 4 space tabs commit 947ea6ee9d7cf72c5635c699b63ddda3be968675 Author: Keith Packard Date: Wed Nov 1 10:55:21 2006 -0800 Fix copyright and license information commit dc41095b577db571439ff1a52facc4efe9f5132f Author: Eric Anholt Date: Thu Nov 9 20:26:09 2006 -0800 Print 8-bit integer output properties as 32-char rows of hex. This happens to produce pretty output for EDID data. commit 67466ebb817e24bfd7f57cc82da16e194eb9c547 Author: Eric Anholt Date: Thu Nov 9 17:15:56 2006 -0800 Add more .gitignore entries. commit aafe9f7d24e96194a7ee11ba521a3c2c72dcdc95 Author: Eric Anholt Date: Thu Nov 9 17:15:06 2006 -0800 Add output for output properties (assuming text) and blanking information. commit 6ba07ae9ea5fa2829d17e8a1f3eb26e7c1a2813e Author: Eric Anholt Date: Wed Nov 8 10:23:47 2006 -0800 Add dot clock to output. commit fba78f58029a806e4446d038b17b843d2c4026a6 Author: Keith Packard Date: Wed Nov 1 00:32:22 2006 -0800 Track protocol moving physical size from mode to output commit d9c45204a16e906b922ac94cae3c9f4f25b3ccdb Author: Keith Packard Date: Thu Oct 26 22:58:58 2006 -0700 add physical size setting commit bd6ac82ff7e7fc04ab589a3053dc7f13ed7a1ec4 Author: Keith Packard Date: Thu Oct 5 21:50:42 2006 -0700 Add crtc info. Mark preferred. Update to new SetCrtcConfig API. commit fe04d38d01f54b93ddaf1cd48a655df7f7fe4b97 Author: Keith Packard Date: Thu Sep 21 08:16:45 2006 -0700 Add CRTC disable code (given crtc, output 0, mode 0) commit 7f1b81d443b78ff572726ad7d72eeb4a87c7189d Author: Keith Packard Date: Wed Sep 20 20:03:22 2006 -0700 xrandr12, a horrible kludge, is now sufficient to do dynamic mergefb games. commit eba1d3d8ab6226737c29e63fdd5433190baab06f Author: Keith Packard Date: Wed Sep 20 20:02:43 2006 -0700 .cvsignore -> .gitignore commit 6c5af262350a5fa33aa37293e8e7b537e344f52a Author: Keith Packard Date: Wed Sep 20 20:02:09 2006 -0700 .cvsignore -> .gitignore commit d8e86340444577dc7634d3e0db24fd809f4e4fbb Author: Keith Packard Date: Tue Sep 19 00:35:46 2006 -0700 Add new xrandr12 program for RandR 1.2 protocol. Yes, xrandr12 will be merged with xrandr before release; it's just for debugging at present. commit f88f8e79724b27f46a836fac4956cbe28749633a Author: Adam Jackson Date: Wed Apr 26 23:43:34 2006 +0000 Bump to 1.0.2 commit 47c6288e63ebe7a9bb2f3225e7d5a235bd979a5f Author: Alan Coopersmith Date: Tue Apr 25 22:54:01 2006 +0000 Don't try to fprintf a NULL string when -display wasn't passed and connecting to $DISPLAY failed, since that segfaults on some platforms. commit 0197bfdddca98c72bca0eeee349b90027638fc32 Author: Adam Jackson Date: Mon Mar 20 18:56:37 2006 +0000 Bug #5511, #5512: Print more sensible error messages when fed broken command lines. (Bill Crawford) commit 4f785cb5db6d95c9f539500e7b202a0f5addd19f Author: Kevin E Martin Date: Wed Dec 21 02:29:53 2005 +0000 Update package version for X11R7 release. commit 83491d233781c9e6a362aa8bac1ab4f2a239fdee Author: Adam Jackson Date: Mon Dec 19 16:22:46 2005 +0000 Stub COPYING files commit 5d09a0b505a2c08b81879e61173459d23f4c41db Author: Kevin E Martin Date: Thu Dec 15 00:24:10 2005 +0000 Update package version number for final X11R7 release candidate. commit 3e0eb5b6f68ef9120153e7f01b4243ad4fa44254 Author: Kevin E Martin Date: Tue Dec 6 22:48:25 2005 +0000 Change *man_SOURCES ==> *man_PRE to fix autotools warnings. commit d52f178dc51182e14d5d7ad9f2842f3e1d30a57f Author: Kevin E Martin Date: Sat Dec 3 05:49:27 2005 +0000 Update package version number for X11R7 RC3 release. commit f3b3596d181a7ab89b90561490f822171ec77479 Author: Alan Coopersmith Date: Mon Nov 28 22:01:46 2005 +0000 Change *mandir targets to use new *_MAN_DIR variables set by xorg-macros.m4 update to fix bug #5167 (Linux prefers *.1x man pages in man1 subdir) commit 28c2280644f808c89e42e379b531fbb0fdf39bc7 Author: Eric Anholt Date: Mon Nov 21 10:35:07 2005 +0000 Another pass at .cvsignores for apps. commit e5ab923625baf41a59e033abf3527709c8ef255b Author: Eric Anholt Date: Sun Nov 20 22:08:55 2005 +0000 Add/improve .cvsignore files for apps. commit 7e1cf1fef9dd000569dd5390380fb567314644a5 Author: Kevin E Martin Date: Sat Nov 19 07:15:38 2005 +0000 Update pkgconfig files to separate library build-time dependencies from application build-time dependencies, and update package deps to work with separate build roots. commit 89ab28833d4e2ff412a92bb2b47af2d78a109c00 Author: Kevin E Martin Date: Wed Oct 19 02:47:57 2005 +0000 Update package version number for RC1 release. commit 60178bb0c8bc97055c9aee7986866ada615491e6 Author: Alan Coopersmith Date: Mon Oct 17 23:56:24 2005 +0000 Use @APP_MAN_SUFFIX@ instead of $(APP_MAN_SUFFIX) in macro substitutions to work better with BSD make commit 958b347b1e5e427858d3e693e5487ec7ba4f5054 Author: Alan Coopersmith Date: Fri Oct 14 00:25:47 2005 +0000 Use sed to fill in variables in man page commit 35e7414c6e4505b2e71be0e54ed0c7ff74f39db1 Author: Aaron Plattner Date: Thu Oct 6 10:03:08 2005 +0000 Tell the user when setting the screen configuration fails. Return nonzero so scripts can find out too. commit 938ff7de3f2bc4979bbf8a5f68190cde2be12696 Author: Kevin E Martin Date: Fri Jul 29 21:22:37 2005 +0000 Various changes preparing packages for RC0: - Verify and update package version numbers as needed - Implement versioning scheme - Change bug address to point to bugzilla bug entry form - Disable loadable i18n in libX11 by default (use --enable-loadable-i18n to reenable it) - Fix makedepend to use pkgconfig and pass distcheck - Update build script to build macros first - Update modular Xorg version commit f241e34fd0f3bedf5aa615dc8e17352b91de8cd9 Author: Daniel Stone Date: Fri Jul 22 07:18:28 2005 +0000 Fix path to man pages. commit f87ac740a20ec3e8b452959081816f5fddeaaf87 Author: Adam Jackson Date: Wed Jul 20 19:32:03 2005 +0000 Use a unique token for PKG_CHECK_MODULES. Otherwise, if you use a global configure cache, you cache it, and the cached value is probably wrong. commit 5666f22654447eb381186a85a8e1630d419b0a88 Author: Søren Sandmann Pedersen Date: Fri Jul 1 20:27:45 2005 +0000 Build systems for xrdb, xrandr, xrefresh commit 39a8c733612722dca456c315a5ad299da1fe29d6 Author: Markus Kuhn Date: Sat Dec 4 00:43:18 2004 +0000 Encoding of numerous files changed to UTF-8 commit df8c56f1f66cce27dd018248a30cd9465d2b545c Author: Egbert Eich Date: Fri Apr 23 19:55:03 2004 +0000 Merging XORG-CURRENT into trunk commit 791685e93f32489dcd2d02a77e1a79ffb6c97c17 Author: Egbert Eich Date: Sun Mar 14 08:35:42 2004 +0000 Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004 commit 342e5f4d491f137e3930213e62192de3eece3155 Author: Egbert Eich Date: Wed Mar 3 12:13:15 2004 +0000 Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004 commit e3c0383c8fdcf38d34b3fad607949b0693184ca7 Author: Egbert Eich Date: Thu Feb 26 13:36:26 2004 +0000 readding XFree86's cvs IDs commit 633350fa648d2b57b3dd94cb1d220a0b826bef55 Author: Egbert Eich Date: Thu Feb 26 09:24:14 2004 +0000 Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004 commit 22c66075090a14ad022ae73a080e76a5ace7c5d1 Author: Kaleb Keithley Date: Tue Nov 25 19:29:15 2003 +0000 XFree86 4.3.99.16 Bring the tree up to date for the Cygwin folks commit 05fa20267de7cdf44fb6de556910ed0e4ce665a5 Author: Kaleb Keithley Date: Fri Nov 14 16:49:23 2003 +0000 XFree86 4.3.0.1 commit c973a27b6d07b8711041c0c22ba8568f168b447a Author: Kaleb Keithley Date: Fri Nov 14 16:49:23 2003 +0000 Initial revision